Bandpass filters with multiple attenuation poles in the stopband

Jsung Ta Tsai, Cheng Liang Huang

研究成果: Article同行評審

6 引文 斯高帕斯(Scopus)

摘要

The sharpness of the roll-off response of bandpass filters is a major concern for wireless communication systems. Bandpass filters with attenuation poles provide sharp roll-off. This paper investigates the performance of a ceramic combine filter with attenuation pole resonators (APRs), and studies the effects of the attenuation pole resonators on the filter response. The presented APRs are improved versions of previous ones [1], [2] and they are modeled here. The obtained results show that the length of APRs can be miniaturized via the loading capacitance. The resultant volume is about 400 mm3, which is very small comparing to coaxial type filters with the same attenuation rate in the stopband. With attenuation pole resonators added, skirt attenuation is greatly improved. Narrow bandwidth bandpass filters with attenuation poles in the stopband are designed and tested. Two designed examples demonstrate the flexibility of the attenuation pole resonator in the filter configuration. Experiments show good agreement with simulation results.

原文English
頁(從 - 到)1160-1165
頁數6
期刊IEICE Transactions on Electronics
E83-C
發行號7
出版狀態Published - 2000 七月 1

All Science Journal Classification (ASJC) codes

  • 電子、光磁材料
  • 電氣與電子工程

指紋

深入研究「Bandpass filters with multiple attenuation poles in the stopband」主題。共同形成了獨特的指紋。

引用此