TY - GEN
T1 - Blockage Effect and Beam Cooperation in Indoor Hotspot Based on 3GPP NR Blockage Model
AU - Yang, Wen Hui
AU - Liu, Kuang Hao
N1 - Funding Information:
ACKNOWLEDGMENT This work was supported by Ministry of Science and Technology, Taiwan, under the grant MOST 106-2221-E-006-023. The authors would like to Dr. Chin-Kuo Jao for his help on implementing beam cooperation in WiSE simulator.
Publisher Copyright:
© 2019 IEEE.
PY - 2019/5
Y1 - 2019/5
N2 - High frequency millimeter wave (mmWave) band is the key carrier to enable multi-gigabit wireless communications. Due to high directivity and penetration loss of mmWave, a beam pair link (BPL) established between a transmitting beam and a receiving beam may be vulnerable to the blockage effect caused by user body and surrounding obstacles. While the existing work mostly considers the mmWave blockage problem in the outdoor scenario, this work studies the mmWave blockage effect in the indoor hotspot scenario where the shorter link distance and a higher blocker density are expected to magnify the blockage effect, compared to the outdoor counterpart. System-level simulations are carried out to assess the blockage effect based on the 3GPP New Radio (NR) channel and blockage models. To mitigate the blockage effect, a beam cooperation mechanism is used by configuring multiple BPLs for a user equipment. Extensive simulation results are presented that offer insights to the mmWave blockage problem in the indoor environment.
AB - High frequency millimeter wave (mmWave) band is the key carrier to enable multi-gigabit wireless communications. Due to high directivity and penetration loss of mmWave, a beam pair link (BPL) established between a transmitting beam and a receiving beam may be vulnerable to the blockage effect caused by user body and surrounding obstacles. While the existing work mostly considers the mmWave blockage problem in the outdoor scenario, this work studies the mmWave blockage effect in the indoor hotspot scenario where the shorter link distance and a higher blocker density are expected to magnify the blockage effect, compared to the outdoor counterpart. System-level simulations are carried out to assess the blockage effect based on the 3GPP New Radio (NR) channel and blockage models. To mitigate the blockage effect, a beam cooperation mechanism is used by configuring multiple BPLs for a user equipment. Extensive simulation results are presented that offer insights to the mmWave blockage problem in the indoor environment.
UR - http://www.scopus.com/inward/record.url?scp=85070198351&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85070198351&partnerID=8YFLogxK
U2 - 10.1109/ICC.2019.8761104
DO - 10.1109/ICC.2019.8761104
M3 - Conference contribution
AN - SCOPUS:85070198351
T3 - IEEE International Conference on Communications
BT - 2019 IEEE International Conference on Communications, ICC 2019 - Proceedings
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2019 IEEE International Conference on Communications, ICC 2019
Y2 - 20 May 2019 through 24 May 2019
ER -