Capacity-based seismic design of a middle-rise residential building in an area of moderately-high seismicity

Banu Ardi Hidayat, Yanuar Haryanto, Nuroji, Sukamta, Wisnu Kurnia Praja, Hsuan Teh Hu

研究成果: Conference article同行評審


As Indonesia is located across three active tectonic plates, it is prone to a high potential earthquake threat. Strict regulations have been introduced to prevent damage to buildings caused by seismic activity. This study aims to examine the behavior of a middle-rise residential building in a moderately-high seismicity area (i.e. Semarang City) and the design of the Reinforced Concrete (RC) members under seismic load. The design was based on the capacity method and the strong column-weak beam concept was applied to the plastic hinge effect that occurred in the beam. Therefore, the analytical computation was performed, taking the structural seismic response into account. Also, the code-based design calculation of RC members was achieved. The measured structural response showed that the building fulfilled the requirements stated in the Indonesia Code of Earthquake-based Design. The first two modes of the building translated in the Y and X directions, which is the preferred response under the earthquake. The story-drifts that occurred were within the acceptable limits and the structural stiffness in the X and Y directions were found to be similar. Finally, the exact design of RC members was found to satisfy the code.

期刊IOP Conference Series: Materials Science and Engineering
出版狀態Published - 2020 12月 18
事件2nd International Conference in Engineering, Technology and Innovative Researches, ICETIR 2020 - Purbalingga, Indonesia
持續時間: 2020 9月 22020 9月 3

All Science Journal Classification (ASJC) codes

  • 材料科學(全部)
  • 工程 (全部)


深入研究「Capacity-based seismic design of a middle-rise residential building in an area of moderately-high seismicity」主題。共同形成了獨特的指紋。