Case study on the bioeffluent of petrochemical wastewater by electro-Fenton method

Yao-Hui Huang, Shanshan Chou, Ming Ging Perng, Gaw Hao Huang, Sheng Shung Cheng

研究成果: Conference article

33 引文 (Scopus)

摘要

The electro-Fenton method, in which ferrous ion is produced at the anode and used as a catalyst of H2O2, was applied for treating the bioeffluent of petrochemical manufacturing wastewater. The major pollutant in the bioeffluent was identified as hexamine, which was nonbiodegradable and contributed 65% of COD. The goal of this study was to treat the biotreatment effluent with more than 50% of COD removal efficiency. Oxidants that involved ozone, ozone/H2O2, sodium hypochlorite, and Fenton's reagent were employed to treat this effluent by jar tests. However, none could meet the goal in the range of operating conditions used. On the other hand, more than 80% of COD was removed with the electro-Fenton process. These screening tests indicated that only the electro-Fenton process was compatible with the goal.

原文English
頁(從 - 到)145-149
頁數5
期刊Water Science and Technology
39
發行號10-11
DOIs
出版狀態Published - 1999 八月 9
事件Proceedings of the 1997 International Specialised Conference on Chemical Process Industries and Envrionmental Management - Cape Town, S Afr
持續時間: 1997 九月 81997 九月 10

指紋

Petrochemicals
Ozone
Effluents
Wastewater
ozone
effluent
wastewater
Oxidants
oxidant
Screening
Anodes
manufacturing
catalyst
Sodium
sodium
Catalysts
ion
pollutant
Ions
petrochemical

All Science Journal Classification (ASJC) codes

  • Environmental Engineering
  • Water Science and Technology

引用此文

Huang, Yao-Hui ; Chou, Shanshan ; Perng, Ming Ging ; Huang, Gaw Hao ; Cheng, Sheng Shung. / Case study on the bioeffluent of petrochemical wastewater by electro-Fenton method. 於: Water Science and Technology. 1999 ; 卷 39, 編號 10-11. 頁 145-149.
@article{c3bd1d75ffe546a08077077d30ba3cc0,
title = "Case study on the bioeffluent of petrochemical wastewater by electro-Fenton method",
abstract = "The electro-Fenton method, in which ferrous ion is produced at the anode and used as a catalyst of H2O2, was applied for treating the bioeffluent of petrochemical manufacturing wastewater. The major pollutant in the bioeffluent was identified as hexamine, which was nonbiodegradable and contributed 65{\%} of COD. The goal of this study was to treat the biotreatment effluent with more than 50{\%} of COD removal efficiency. Oxidants that involved ozone, ozone/H2O2, sodium hypochlorite, and Fenton's reagent were employed to treat this effluent by jar tests. However, none could meet the goal in the range of operating conditions used. On the other hand, more than 80{\%} of COD was removed with the electro-Fenton process. These screening tests indicated that only the electro-Fenton process was compatible with the goal.",
author = "Yao-Hui Huang and Shanshan Chou and Perng, {Ming Ging} and Huang, {Gaw Hao} and Cheng, {Sheng Shung}",
year = "1999",
month = "8",
day = "9",
doi = "10.1016/S0273-1223(99)00265-6",
language = "English",
volume = "39",
pages = "145--149",
journal = "Water Science and Technology",
issn = "0273-1223",
publisher = "IWA Publishing",
number = "10-11",

}

Case study on the bioeffluent of petrochemical wastewater by electro-Fenton method. / Huang, Yao-Hui; Chou, Shanshan; Perng, Ming Ging; Huang, Gaw Hao; Cheng, Sheng Shung.

於: Water Science and Technology, 卷 39, 編號 10-11, 09.08.1999, p. 145-149.

研究成果: Conference article

TY - JOUR

T1 - Case study on the bioeffluent of petrochemical wastewater by electro-Fenton method

AU - Huang, Yao-Hui

AU - Chou, Shanshan

AU - Perng, Ming Ging

AU - Huang, Gaw Hao

AU - Cheng, Sheng Shung

PY - 1999/8/9

Y1 - 1999/8/9

N2 - The electro-Fenton method, in which ferrous ion is produced at the anode and used as a catalyst of H2O2, was applied for treating the bioeffluent of petrochemical manufacturing wastewater. The major pollutant in the bioeffluent was identified as hexamine, which was nonbiodegradable and contributed 65% of COD. The goal of this study was to treat the biotreatment effluent with more than 50% of COD removal efficiency. Oxidants that involved ozone, ozone/H2O2, sodium hypochlorite, and Fenton's reagent were employed to treat this effluent by jar tests. However, none could meet the goal in the range of operating conditions used. On the other hand, more than 80% of COD was removed with the electro-Fenton process. These screening tests indicated that only the electro-Fenton process was compatible with the goal.

AB - The electro-Fenton method, in which ferrous ion is produced at the anode and used as a catalyst of H2O2, was applied for treating the bioeffluent of petrochemical manufacturing wastewater. The major pollutant in the bioeffluent was identified as hexamine, which was nonbiodegradable and contributed 65% of COD. The goal of this study was to treat the biotreatment effluent with more than 50% of COD removal efficiency. Oxidants that involved ozone, ozone/H2O2, sodium hypochlorite, and Fenton's reagent were employed to treat this effluent by jar tests. However, none could meet the goal in the range of operating conditions used. On the other hand, more than 80% of COD was removed with the electro-Fenton process. These screening tests indicated that only the electro-Fenton process was compatible with the goal.

UR - http://www.scopus.com/inward/record.url?scp=0032789546&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032789546&partnerID=8YFLogxK

U2 - 10.1016/S0273-1223(99)00265-6

DO - 10.1016/S0273-1223(99)00265-6

M3 - Conference article

AN - SCOPUS:0032789546

VL - 39

SP - 145

EP - 149

JO - Water Science and Technology

JF - Water Science and Technology

SN - 0273-1223

IS - 10-11

ER -