Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting

Kai Jyun Jhong; Tsung Wei Chang; Wen Hsi Lee; Mi Ching Tsai; I. Hua Jiang

doi:10.1063/1.5080134

Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting

Kai Jyun Jhong, Tsung Wei Chang, Wen Hsi Lee, Mi Ching Tsai, I. Hua Jiang

研究成果: Article › 同行評審

17 引文斯高帕斯（Scopus）

摘要

In this paper, a soft magnetic composite (SMC) material, FeSiCr, is analyzed for its beneficial electromagnetic properties and unique 3D formation capacity, which endows a very high potential to become the material for electric motor fabrication by 3D printing technology adopting high temperature selective laser melting (SLM) process. A microscopic and spectroscopic experiment performed on FeSiCr after SLM process showed that FeO is the oxide layer responsible for the unique advantages of this material. Furthermore, FeSiCr is proved to have lower core loss and eddy current loss at high frequency via the comparison analysis between FeSiCr and silicon steel sheet, a popularly used material for electric motor construction.

原文	English
文章編號	035317
期刊	AIP Advances
卷	9
發行號	3
DOIs	https://doi.org/10.1063/1.5080134
出版狀態	Published - 2019 3月 1

All Science Journal Classification (ASJC) codes

一般物理與天文學

存取文件

10.1063/1.5080134

其它文件與鏈接

引用此

@article{c40ddc74f53a4d03b212ec4feb0348e5,

title = "Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting",

abstract = "In this paper, a soft magnetic composite (SMC) material, FeSiCr, is analyzed for its beneficial electromagnetic properties and unique 3D formation capacity, which endows a very high potential to become the material for electric motor fabrication by 3D printing technology adopting high temperature selective laser melting (SLM) process. A microscopic and spectroscopic experiment performed on FeSiCr after SLM process showed that FeO is the oxide layer responsible for the unique advantages of this material. Furthermore, FeSiCr is proved to have lower core loss and eddy current loss at high frequency via the comparison analysis between FeSiCr and silicon steel sheet, a popularly used material for electric motor construction.",

author = "Jhong, {Kai Jyun} and Chang, {Tsung Wei} and Lee, {Wen Hsi} and Tsai, {Mi Ching} and Jiang, {I. Hua}",

note = "Funding Information: This paper would like to thank the Ministry of Science and Technology for financial support under MOST 107-2218-E-006-019. Funding Information: This paper would like to thank the Ministry of Science and Technology for financial support under “MOST 107-2218-E-006-019”. Publisher Copyright: {\textcopyright} 2019 Author(s).",

year = "2019",

month = mar,

day = "1",

doi = "10.1063/1.5080134",

language = "English",

volume = "9",

journal = "AIP Advances",

issn = "2158-3226",

publisher = "American Institute of Physics Publising LLC",

number = "3",

}

TY - JOUR

T1 - Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting

AU - Jhong, Kai Jyun

AU - Chang, Tsung Wei

AU - Lee, Wen Hsi

AU - Tsai, Mi Ching

AU - Jiang, I. Hua

N1 - Funding Information: This paper would like to thank the Ministry of Science and Technology for financial support under MOST 107-2218-E-006-019. Funding Information: This paper would like to thank the Ministry of Science and Technology for financial support under “MOST 107-2218-E-006-019”. Publisher Copyright: © 2019 Author(s).

PY - 2019/3/1

Y1 - 2019/3/1

N2 - In this paper, a soft magnetic composite (SMC) material, FeSiCr, is analyzed for its beneficial electromagnetic properties and unique 3D formation capacity, which endows a very high potential to become the material for electric motor fabrication by 3D printing technology adopting high temperature selective laser melting (SLM) process. A microscopic and spectroscopic experiment performed on FeSiCr after SLM process showed that FeO is the oxide layer responsible for the unique advantages of this material. Furthermore, FeSiCr is proved to have lower core loss and eddy current loss at high frequency via the comparison analysis between FeSiCr and silicon steel sheet, a popularly used material for electric motor construction.

AB - In this paper, a soft magnetic composite (SMC) material, FeSiCr, is analyzed for its beneficial electromagnetic properties and unique 3D formation capacity, which endows a very high potential to become the material for electric motor fabrication by 3D printing technology adopting high temperature selective laser melting (SLM) process. A microscopic and spectroscopic experiment performed on FeSiCr after SLM process showed that FeO is the oxide layer responsible for the unique advantages of this material. Furthermore, FeSiCr is proved to have lower core loss and eddy current loss at high frequency via the comparison analysis between FeSiCr and silicon steel sheet, a popularly used material for electric motor construction.

UR - http://www.scopus.com/inward/record.url?scp=85062912099&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85062912099&partnerID=8YFLogxK

U2 - 10.1063/1.5080134

DO - 10.1063/1.5080134

M3 - Article

AN - SCOPUS:85062912099

SN - 2158-3226

VL - 9

JO - AIP Advances

JF - AIP Advances

IS - 3

M1 - 035317

ER -

Characteristic of high frequency Fe-Si-Cr material for motor application by selective laser melting

摘要

All Science Journal Classification (ASJC) codes

存取文件

其它文件與鏈接

指紋

引用此