Characteristics of ground vibration induced by sand compaction pile driving in coal ash ground

Yung-Yen Ko, Jin Hung Hwang, Huei Shan Chen

研究成果: Article

摘要

The sand compaction pile method is frequently used for the improvement of soft ground. However, its driving process will induce ground vibration. In this study, in-situ measurement was conducted on the ground vibration induced by the sand pile driving at the coal ash filled ground at the ash pond in Taichung Thermal Power Plant. The peak ground velocity, the frequency content and the attenuation tendency of the ground vibration was investigated. Results show that during the three phases of sand pile driving, penetration, pull out and compaction, the maximum ground vibration was caused when the compaction was made near the ground surface. The predominant frequency of the induced ground vibration was exactly the operation frequency of vibratory pile driving equipment. The ground vibration during the compaction in the coal ash layer attenuated more rapidly than in the original soil layer. Moreover, the data were compared to the acceptance criteria in the vibration codes of different countries, and the ground vibration induced by the sand pile driving generally would cause hardly any damage on structures which locate beyond a distance of 20 m from the vibration source.

原文English
頁(從 - 到)323-334
頁數12
期刊Journal of the Chinese Institute of Civil and Hydraulic Engineering
26
發行號4
出版狀態Published - 2014 十二月 1

指紋

Pile driving
Coal ash
Vibrations (mechanical)
Compaction
Sand
Ponds
Piles
Power plants
Soils

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering

引用此文

@article{4431f1179b6740509f63f78f42db04ee,
title = "Characteristics of ground vibration induced by sand compaction pile driving in coal ash ground",
abstract = "The sand compaction pile method is frequently used for the improvement of soft ground. However, its driving process will induce ground vibration. In this study, in-situ measurement was conducted on the ground vibration induced by the sand pile driving at the coal ash filled ground at the ash pond in Taichung Thermal Power Plant. The peak ground velocity, the frequency content and the attenuation tendency of the ground vibration was investigated. Results show that during the three phases of sand pile driving, penetration, pull out and compaction, the maximum ground vibration was caused when the compaction was made near the ground surface. The predominant frequency of the induced ground vibration was exactly the operation frequency of vibratory pile driving equipment. The ground vibration during the compaction in the coal ash layer attenuated more rapidly than in the original soil layer. Moreover, the data were compared to the acceptance criteria in the vibration codes of different countries, and the ground vibration induced by the sand pile driving generally would cause hardly any damage on structures which locate beyond a distance of 20 m from the vibration source.",
author = "Yung-Yen Ko and Hwang, {Jin Hung} and Chen, {Huei Shan}",
year = "2014",
month = "12",
day = "1",
language = "English",
volume = "26",
pages = "323--334",
journal = "Journal of the Chinese Institute of Civil and Hydraulic Engineering",
issn = "1015-5856",
publisher = "Chinese Institute of Civil and Hydraulic Engineering",
number = "4",

}

TY - JOUR

T1 - Characteristics of ground vibration induced by sand compaction pile driving in coal ash ground

AU - Ko, Yung-Yen

AU - Hwang, Jin Hung

AU - Chen, Huei Shan

PY - 2014/12/1

Y1 - 2014/12/1

N2 - The sand compaction pile method is frequently used for the improvement of soft ground. However, its driving process will induce ground vibration. In this study, in-situ measurement was conducted on the ground vibration induced by the sand pile driving at the coal ash filled ground at the ash pond in Taichung Thermal Power Plant. The peak ground velocity, the frequency content and the attenuation tendency of the ground vibration was investigated. Results show that during the three phases of sand pile driving, penetration, pull out and compaction, the maximum ground vibration was caused when the compaction was made near the ground surface. The predominant frequency of the induced ground vibration was exactly the operation frequency of vibratory pile driving equipment. The ground vibration during the compaction in the coal ash layer attenuated more rapidly than in the original soil layer. Moreover, the data were compared to the acceptance criteria in the vibration codes of different countries, and the ground vibration induced by the sand pile driving generally would cause hardly any damage on structures which locate beyond a distance of 20 m from the vibration source.

AB - The sand compaction pile method is frequently used for the improvement of soft ground. However, its driving process will induce ground vibration. In this study, in-situ measurement was conducted on the ground vibration induced by the sand pile driving at the coal ash filled ground at the ash pond in Taichung Thermal Power Plant. The peak ground velocity, the frequency content and the attenuation tendency of the ground vibration was investigated. Results show that during the three phases of sand pile driving, penetration, pull out and compaction, the maximum ground vibration was caused when the compaction was made near the ground surface. The predominant frequency of the induced ground vibration was exactly the operation frequency of vibratory pile driving equipment. The ground vibration during the compaction in the coal ash layer attenuated more rapidly than in the original soil layer. Moreover, the data were compared to the acceptance criteria in the vibration codes of different countries, and the ground vibration induced by the sand pile driving generally would cause hardly any damage on structures which locate beyond a distance of 20 m from the vibration source.

UR - http://www.scopus.com/inward/record.url?scp=84924759758&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84924759758&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84924759758

VL - 26

SP - 323

EP - 334

JO - Journal of the Chinese Institute of Civil and Hydraulic Engineering

JF - Journal of the Chinese Institute of Civil and Hydraulic Engineering

SN - 1015-5856

IS - 4

ER -