Characteristics of mold filling in resin transfer molding (RTM) and structural reaction injection molding (SRIM)

M. J. Liou; W. B. Young; K. Rupel; K. Han; L. J. Lee

Characteristics of mold filling in resin transfer molding (RTM) and structural reaction injection molding (SRIM)

M. J. Liou, W. B. Young, K. Rupel, K. Han, L. J. Lee

研究成果: Conference article › 同行評審

摘要

This study is focused on characterizing the mechanism associated with mold filling in the SRIM and RTM processes by investigating the effects of stacking sequences of reinforcement fiber mats on the mold filling. A numerical simulation model has been developed to predict the flow front progression and pressure field during mold filling. The predictions of these models are compared with flow visualization experiments with variations in permeability.

原文	English
頁（從 - 到）	1058-1066
頁數	9
期刊	National SAMPE Technical Conference
卷	21
出版狀態	Published - 1989
事件	21st International SAMPE Technical Conference - Atlantic City, NJ, USA 持續時間: 1989 9月 25 → 1989 9月 28

All Science Journal Classification (ASJC) codes

工程 (全部)

其它文件與鏈接

Link to publication in Scopus

引用此

@article{3bce1d1ab0d844ae8e7f8dbd42a74c58,

title = "Characteristics of mold filling in resin transfer molding (RTM) and structural reaction injection molding (SRIM)",

abstract = "This study is focused on characterizing the mechanism associated with mold filling in the SRIM and RTM processes by investigating the effects of stacking sequences of reinforcement fiber mats on the mold filling. A numerical simulation model has been developed to predict the flow front progression and pressure field during mold filling. The predictions of these models are compared with flow visualization experiments with variations in permeability.",

author = "Liou, {M. J.} and Young, {W. B.} and K. Rupel and K. Han and Lee, {L. J.}",

year = "1989",

language = "English",

volume = "21",

pages = "1058--1066",

journal = "National SAMPE Technical Conference",

issn = "0147-9601",

note = "21st International SAMPE Technical Conference ; Conference date: 25-09-1989 Through 28-09-1989",

}

TY - JOUR

T1 - Characteristics of mold filling in resin transfer molding (RTM) and structural reaction injection molding (SRIM)

AU - Liou, M. J.

AU - Young, W. B.

AU - Rupel, K.

AU - Han, K.

AU - Lee, L. J.

PY - 1989

Y1 - 1989

N2 - This study is focused on characterizing the mechanism associated with mold filling in the SRIM and RTM processes by investigating the effects of stacking sequences of reinforcement fiber mats on the mold filling. A numerical simulation model has been developed to predict the flow front progression and pressure field during mold filling. The predictions of these models are compared with flow visualization experiments with variations in permeability.

AB - This study is focused on characterizing the mechanism associated with mold filling in the SRIM and RTM processes by investigating the effects of stacking sequences of reinforcement fiber mats on the mold filling. A numerical simulation model has been developed to predict the flow front progression and pressure field during mold filling. The predictions of these models are compared with flow visualization experiments with variations in permeability.

UR - http://www.scopus.com/inward/record.url?scp=0024940874&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024940874&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:0024940874

VL - 21

SP - 1058

EP - 1066

JO - National SAMPE Technical Conference

JF - National SAMPE Technical Conference

SN - 0147-9601

T2 - 21st International SAMPE Technical Conference

Y2 - 25 September 1989 through 28 September 1989

ER -

Characteristics of mold filling in resin transfer molding (RTM) and structural reaction injection molding (SRIM)

摘要

All Science Journal Classification (ASJC) codes

其它文件與鏈接

指紋

引用此