Co-axially electrospun PVDF fibers with hollow wall to enhance potential output

Y. C. Lai, H. C. Wu, C. T. Pan, C. K. Yen, C. H. Tsao, Liwei Lin, S. W. Kuo, Y. S. Lu, Sheng-Chih Shen

研究成果: Conference contribution

1 引文 (Scopus)

摘要

In this study, a CNFES (cylindrical near-field electrospinning) process and a metallic coaxial needle injector were used to fabricate piezoelectric PVDF (polyvinylidene fluoride) hollow-walled fibers. Piezoelectric fibers devices with interdigitated electrode were fabricated to capture potential signal. First, the PVDF powder was mixed in the acetone solution and the fluorosurfactant was dissolved with the dimethyl sulfoxide to prepare PVDF macromolecular solution. Second, PVDF macromolecular solution was filled in the outer needle, air was filled in the syringe of inner needle and the metal needle coaxial injector contacted a high power supply. When the PVDF droplet in the coaxial needle was subjected to high electric field, the droplet overcame surface tension of the solution and became a Taylor cone, extremely fine hollow-walled PVDF fibers was spun out on collectors. The hollow-walled PVDF fibers were collected by a cylindrical device on the XY-axis digital platform. The diameter of hollow-walled PVDF fibers could be controlled by adjusting the electric field and the rotating speed of the cylindrical collector. The experimental images reveal structures of the hollow-walled PVDF fibers. In comparison of the solid PVDF and the hollow-walled PVDF fibers, the solid PVDF fibers with IDT (interdigitated electrode) could generate maximum peak voltage of 35.731-213.827 mV at frequencies of 2-9 Hz, whereas the hollow-walled PVDF fibers with IDT electrode could generate maximum peak voltage of 44.092-246.088 mV. The hollow-walled fibers with higher area/volume ratio and mechanical stiffness can produce more potential voltage.

原文English
主出版物標題9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014
發行者Institute of Electrical and Electronics Engineers Inc.
頁面614-617
頁數4
ISBN(電子)9781479947270
DOIs
出版狀態Published - 2014 九月 23
事件9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014 - Waikiki Beach, United States
持續時間: 2014 四月 132014 四月 16

出版系列

名字9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014

Other

Other9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014
國家United States
城市Waikiki Beach
期間14-04-1314-04-16

指紋

Fibers
Needles
Electrodes
Electric potential
Electric fields
Syringes
Dimethyl sulfoxide
Electrospinning
Acetone
Surface tension
Cones
Stiffness
Powders
Air
Metals

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

引用此文

Lai, Y. C., Wu, H. C., Pan, C. T., Yen, C. K., Tsao, C. H., Lin, L., ... Shen, S-C. (2014). Co-axially electrospun PVDF fibers with hollow wall to enhance potential output. 於 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014 (頁 614-617). [6908886] (9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/NEMS.2014.6908886
Lai, Y. C. ; Wu, H. C. ; Pan, C. T. ; Yen, C. K. ; Tsao, C. H. ; Lin, Liwei ; Kuo, S. W. ; Lu, Y. S. ; Shen, Sheng-Chih. / Co-axially electrospun PVDF fibers with hollow wall to enhance potential output. 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014. Institute of Electrical and Electronics Engineers Inc., 2014. 頁 614-617 (9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014).
@inproceedings{d6462a96674244ea90a2b702a6dbac5e,
title = "Co-axially electrospun PVDF fibers with hollow wall to enhance potential output",
abstract = "In this study, a CNFES (cylindrical near-field electrospinning) process and a metallic coaxial needle injector were used to fabricate piezoelectric PVDF (polyvinylidene fluoride) hollow-walled fibers. Piezoelectric fibers devices with interdigitated electrode were fabricated to capture potential signal. First, the PVDF powder was mixed in the acetone solution and the fluorosurfactant was dissolved with the dimethyl sulfoxide to prepare PVDF macromolecular solution. Second, PVDF macromolecular solution was filled in the outer needle, air was filled in the syringe of inner needle and the metal needle coaxial injector contacted a high power supply. When the PVDF droplet in the coaxial needle was subjected to high electric field, the droplet overcame surface tension of the solution and became a Taylor cone, extremely fine hollow-walled PVDF fibers was spun out on collectors. The hollow-walled PVDF fibers were collected by a cylindrical device on the XY-axis digital platform. The diameter of hollow-walled PVDF fibers could be controlled by adjusting the electric field and the rotating speed of the cylindrical collector. The experimental images reveal structures of the hollow-walled PVDF fibers. In comparison of the solid PVDF and the hollow-walled PVDF fibers, the solid PVDF fibers with IDT (interdigitated electrode) could generate maximum peak voltage of 35.731-213.827 mV at frequencies of 2-9 Hz, whereas the hollow-walled PVDF fibers with IDT electrode could generate maximum peak voltage of 44.092-246.088 mV. The hollow-walled fibers with higher area/volume ratio and mechanical stiffness can produce more potential voltage.",
author = "Lai, {Y. C.} and Wu, {H. C.} and Pan, {C. T.} and Yen, {C. K.} and Tsao, {C. H.} and Liwei Lin and Kuo, {S. W.} and Lu, {Y. S.} and Sheng-Chih Shen",
year = "2014",
month = "9",
day = "23",
doi = "10.1109/NEMS.2014.6908886",
language = "English",
series = "9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "614--617",
booktitle = "9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014",
address = "United States",

}

Lai, YC, Wu, HC, Pan, CT, Yen, CK, Tsao, CH, Lin, L, Kuo, SW, Lu, YS & Shen, S-C 2014, Co-axially electrospun PVDF fibers with hollow wall to enhance potential output. 於 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014., 6908886, 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014, Institute of Electrical and Electronics Engineers Inc., 頁 614-617, 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014, Waikiki Beach, United States, 14-04-13. https://doi.org/10.1109/NEMS.2014.6908886

Co-axially electrospun PVDF fibers with hollow wall to enhance potential output. / Lai, Y. C.; Wu, H. C.; Pan, C. T.; Yen, C. K.; Tsao, C. H.; Lin, Liwei; Kuo, S. W.; Lu, Y. S.; Shen, Sheng-Chih.

9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014. Institute of Electrical and Electronics Engineers Inc., 2014. p. 614-617 6908886 (9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014).

研究成果: Conference contribution

TY - GEN

T1 - Co-axially electrospun PVDF fibers with hollow wall to enhance potential output

AU - Lai, Y. C.

AU - Wu, H. C.

AU - Pan, C. T.

AU - Yen, C. K.

AU - Tsao, C. H.

AU - Lin, Liwei

AU - Kuo, S. W.

AU - Lu, Y. S.

AU - Shen, Sheng-Chih

PY - 2014/9/23

Y1 - 2014/9/23

N2 - In this study, a CNFES (cylindrical near-field electrospinning) process and a metallic coaxial needle injector were used to fabricate piezoelectric PVDF (polyvinylidene fluoride) hollow-walled fibers. Piezoelectric fibers devices with interdigitated electrode were fabricated to capture potential signal. First, the PVDF powder was mixed in the acetone solution and the fluorosurfactant was dissolved with the dimethyl sulfoxide to prepare PVDF macromolecular solution. Second, PVDF macromolecular solution was filled in the outer needle, air was filled in the syringe of inner needle and the metal needle coaxial injector contacted a high power supply. When the PVDF droplet in the coaxial needle was subjected to high electric field, the droplet overcame surface tension of the solution and became a Taylor cone, extremely fine hollow-walled PVDF fibers was spun out on collectors. The hollow-walled PVDF fibers were collected by a cylindrical device on the XY-axis digital platform. The diameter of hollow-walled PVDF fibers could be controlled by adjusting the electric field and the rotating speed of the cylindrical collector. The experimental images reveal structures of the hollow-walled PVDF fibers. In comparison of the solid PVDF and the hollow-walled PVDF fibers, the solid PVDF fibers with IDT (interdigitated electrode) could generate maximum peak voltage of 35.731-213.827 mV at frequencies of 2-9 Hz, whereas the hollow-walled PVDF fibers with IDT electrode could generate maximum peak voltage of 44.092-246.088 mV. The hollow-walled fibers with higher area/volume ratio and mechanical stiffness can produce more potential voltage.

AB - In this study, a CNFES (cylindrical near-field electrospinning) process and a metallic coaxial needle injector were used to fabricate piezoelectric PVDF (polyvinylidene fluoride) hollow-walled fibers. Piezoelectric fibers devices with interdigitated electrode were fabricated to capture potential signal. First, the PVDF powder was mixed in the acetone solution and the fluorosurfactant was dissolved with the dimethyl sulfoxide to prepare PVDF macromolecular solution. Second, PVDF macromolecular solution was filled in the outer needle, air was filled in the syringe of inner needle and the metal needle coaxial injector contacted a high power supply. When the PVDF droplet in the coaxial needle was subjected to high electric field, the droplet overcame surface tension of the solution and became a Taylor cone, extremely fine hollow-walled PVDF fibers was spun out on collectors. The hollow-walled PVDF fibers were collected by a cylindrical device on the XY-axis digital platform. The diameter of hollow-walled PVDF fibers could be controlled by adjusting the electric field and the rotating speed of the cylindrical collector. The experimental images reveal structures of the hollow-walled PVDF fibers. In comparison of the solid PVDF and the hollow-walled PVDF fibers, the solid PVDF fibers with IDT (interdigitated electrode) could generate maximum peak voltage of 35.731-213.827 mV at frequencies of 2-9 Hz, whereas the hollow-walled PVDF fibers with IDT electrode could generate maximum peak voltage of 44.092-246.088 mV. The hollow-walled fibers with higher area/volume ratio and mechanical stiffness can produce more potential voltage.

UR - http://www.scopus.com/inward/record.url?scp=84908627729&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84908627729&partnerID=8YFLogxK

U2 - 10.1109/NEMS.2014.6908886

DO - 10.1109/NEMS.2014.6908886

M3 - Conference contribution

AN - SCOPUS:84908627729

T3 - 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014

SP - 614

EP - 617

BT - 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

Lai YC, Wu HC, Pan CT, Yen CK, Tsao CH, Lin L 等. Co-axially electrospun PVDF fibers with hollow wall to enhance potential output. 於 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014. Institute of Electrical and Electronics Engineers Inc. 2014. p. 614-617. 6908886. (9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE-NEMS 2014). https://doi.org/10.1109/NEMS.2014.6908886