Continuous Waste Cooking Oil Transesterification with Microwave Heating and Strontium Oxide Catalyst

Han Lee, Jiunn Der Liao, Jung Wei Yang, Wen Dung Hsu, Bernard Haochih Liu, Teng Chien Chen, Kundan Sivashanmugan, Aharon Gedanken

研究成果: Article

2 引文 (Scopus)

摘要

Biodiesel produced from waste cooking oils (WCOs) mixed with methanol was efficiently transesterified using a continuous fluid flow system with a focused microwave heating device. Strontium oxide (SrO) was added as the catalyst. The factors that most influence the biodiesel conversion rate were first estimated by considering the effects of oil-to-methanol ratio, added quantity of SrO, and microwave heating power on reaction time in a built-in batch unit. The optimal parameter values were then applied to a continuous fluid flow system, which simulates the conversion of a scaled-up quantity of WCOs into biodiesel. Under the optimum fluid flow velocity and an appropriate output temperature, a biodiesel conversion rate of ca. 93 % was reached, associated with the decomposition of ester bonds and the formation of a tetrahedral intermediate substance during the reaction.

原文English
頁(從 - 到)192-198
頁數7
期刊Chemical Engineering and Technology
41
發行號1
DOIs
出版狀態Published - 2018 一月 1

指紋

Strontium
Microwave heating
Biofuels
Transesterification
Cooking
Biodiesel
Oxides
Oils
Flow of fluids
Catalysts
Methanol
Flow velocity
Esters
Decomposition
Temperature

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)
  • Industrial and Manufacturing Engineering

引用此文

@article{63203d9e7ddc4efb955cf3f47c2becc8,
title = "Continuous Waste Cooking Oil Transesterification with Microwave Heating and Strontium Oxide Catalyst",
abstract = "Biodiesel produced from waste cooking oils (WCOs) mixed with methanol was efficiently transesterified using a continuous fluid flow system with a focused microwave heating device. Strontium oxide (SrO) was added as the catalyst. The factors that most influence the biodiesel conversion rate were first estimated by considering the effects of oil-to-methanol ratio, added quantity of SrO, and microwave heating power on reaction time in a built-in batch unit. The optimal parameter values were then applied to a continuous fluid flow system, which simulates the conversion of a scaled-up quantity of WCOs into biodiesel. Under the optimum fluid flow velocity and an appropriate output temperature, a biodiesel conversion rate of ca. 93 {\%} was reached, associated with the decomposition of ester bonds and the formation of a tetrahedral intermediate substance during the reaction.",
author = "Han Lee and Liao, {Jiunn Der} and Yang, {Jung Wei} and Hsu, {Wen Dung} and Liu, {Bernard Haochih} and Chen, {Teng Chien} and Kundan Sivashanmugan and Aharon Gedanken",
year = "2018",
month = "1",
day = "1",
doi = "10.1002/ceat.201600561",
language = "English",
volume = "41",
pages = "192--198",
journal = "Chemical Engineering and Technology",
issn = "0930-7516",
publisher = "Wiley-VCH Verlag",
number = "1",

}

Continuous Waste Cooking Oil Transesterification with Microwave Heating and Strontium Oxide Catalyst. / Lee, Han; Liao, Jiunn Der; Yang, Jung Wei; Hsu, Wen Dung; Liu, Bernard Haochih; Chen, Teng Chien; Sivashanmugan, Kundan; Gedanken, Aharon.

於: Chemical Engineering and Technology, 卷 41, 編號 1, 01.01.2018, p. 192-198.

研究成果: Article

TY - JOUR

T1 - Continuous Waste Cooking Oil Transesterification with Microwave Heating and Strontium Oxide Catalyst

AU - Lee, Han

AU - Liao, Jiunn Der

AU - Yang, Jung Wei

AU - Hsu, Wen Dung

AU - Liu, Bernard Haochih

AU - Chen, Teng Chien

AU - Sivashanmugan, Kundan

AU - Gedanken, Aharon

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Biodiesel produced from waste cooking oils (WCOs) mixed with methanol was efficiently transesterified using a continuous fluid flow system with a focused microwave heating device. Strontium oxide (SrO) was added as the catalyst. The factors that most influence the biodiesel conversion rate were first estimated by considering the effects of oil-to-methanol ratio, added quantity of SrO, and microwave heating power on reaction time in a built-in batch unit. The optimal parameter values were then applied to a continuous fluid flow system, which simulates the conversion of a scaled-up quantity of WCOs into biodiesel. Under the optimum fluid flow velocity and an appropriate output temperature, a biodiesel conversion rate of ca. 93 % was reached, associated with the decomposition of ester bonds and the formation of a tetrahedral intermediate substance during the reaction.

AB - Biodiesel produced from waste cooking oils (WCOs) mixed with methanol was efficiently transesterified using a continuous fluid flow system with a focused microwave heating device. Strontium oxide (SrO) was added as the catalyst. The factors that most influence the biodiesel conversion rate were first estimated by considering the effects of oil-to-methanol ratio, added quantity of SrO, and microwave heating power on reaction time in a built-in batch unit. The optimal parameter values were then applied to a continuous fluid flow system, which simulates the conversion of a scaled-up quantity of WCOs into biodiesel. Under the optimum fluid flow velocity and an appropriate output temperature, a biodiesel conversion rate of ca. 93 % was reached, associated with the decomposition of ester bonds and the formation of a tetrahedral intermediate substance during the reaction.

UR - http://www.scopus.com/inward/record.url?scp=85033438166&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85033438166&partnerID=8YFLogxK

U2 - 10.1002/ceat.201600561

DO - 10.1002/ceat.201600561

M3 - Article

AN - SCOPUS:85033438166

VL - 41

SP - 192

EP - 198

JO - Chemical Engineering and Technology

JF - Chemical Engineering and Technology

SN - 0930-7516

IS - 1

ER -