Correlation between corrosion resistance properties and thermal cycles experienced by gas tungsten arc welding and laser beam welding Alloy 690 butt weldments

Hwa Teng Lee, Jia Lin Wu

研究成果: Article同行評審

28 引文 斯高帕斯(Scopus)

摘要

This study investigates the correlation between the thermal cycles experienced by Alloy 690 weldments fabricated using gas tungsten arc welding (GTAW) and laser beam welding (LBW) processes, and their corresponding corrosion resistance properties. The corrosion resistance of the weldments is evaluated using a U-bend stress corrosion test in which the specimens are immersed in a boiling, acid solution for 240 h. The experimental results reveal that the LBW inputs significantly less heat to the weldment than the GTAW, and therefore yields a far faster cooling rate. Moreover, the corrosion tests show that in the GTAW specimen, intergranular corrosion (IGC) occurs in both the fusion zone (FZ) and the heat affected zone (HAZ). By contrast, the LBW specimen shows no obvious signs of IGC.

原文English
頁(從 - 到)733-743
頁數11
期刊Corrosion Science
51
發行號4
DOIs
出版狀態Published - 2009 4月

All Science Journal Classification (ASJC) codes

  • 一般化學
  • 一般化學工程
  • 一般材料科學

指紋

深入研究「Correlation between corrosion resistance properties and thermal cycles experienced by gas tungsten arc welding and laser beam welding Alloy 690 butt weldments」主題。共同形成了獨特的指紋。

引用此