6061鋁合金於硫酸溶液中進行陽極氧化處理的薄膜裂痕形成與耐腐蝕行為之研究

I. Chun Chung, Chen Kuei Chung, Yan Kuin Su

研究成果: Article

摘要

The 6061 aluminum alloys (AA6061) specimens were anodized in the sulfuric acid solution. The crack formation and corrosion behavior of the AA6061 oxide films were investigated in a wide range of sulfuric acid concentration (1~5 M) and current density (0.3~3 A/dm2). A number of cracks were formed on the surface of the anodized AA6061 oxide film at a high electrolyte concentration of 5 M and low current density of 0.3 A/dm2. Moreover, increasing current density could suppress crack formation at a high concentration of 5 M while decreasing electrolyte concentration was also helpful for eliminating cracks at a constant current density of 1 A/dm2. The more the cracks, the higher the corrosion current was. Suppressing crack formation was crucial for promoting corrosion resistance of the AA6061 film with less corrosion current. The best corrosion resistance of the anodized film with Icorr=1.433×10-10 A/cm2 was obtained at a current density of 1 A/dm2 and a concentration of 1 M sulfuric acid, that could be potentially used for long-term anti-corrosion coatings on many AA6061 alloy products.

貢獻的翻譯標題Crack Formation and Corrosion Behavior of 6061 Al Alloy in Sulfuric Acid
原文Chinese
頁(從 - 到)287-293
頁數7
期刊Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao
39
發行號3
出版狀態Published - 2018 六月 1

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

指紋 深入研究「6061鋁合金於硫酸溶液中進行陽極氧化處理的薄膜裂痕形成與耐腐蝕行為之研究」主題。共同形成了獨特的指紋。

  • 引用此