CuO nanoparticles decorated nano-dendrite-structured CuBi2O4 for highly sensitive and selective electrochemical detection of glucose

Cheng Hsien Wu, Emeline Onno, Chia-Yu Lin

研究成果: Article

7 引文 (Scopus)

摘要

In this study, a chemically modified electrode, consisting of CuO nanoparticles decorated nano-dendrite-structured CuBi2O4 (nanoCuBi2O4|CuO), was fabricated and its application as an electrocatalyst in catalyzing the oxidation of glucose was investigated. nanoCuBi2O4|CuO was fabricated by firstly electrodepositing BiOI nanosheet array (nanoBiOI) on the flourine-doped tin oxide coated glass substrate, followed by its conversion into nanoCuBi2O4|CuO via drop-casting an ethanolic Cu2+ solution and follow-up thermal treatment. The degree of conversion of nanoBiOI into nanoCuBi2O4|CuO and electrocatalytic activites of resultant nanoCuBi2O4|CuO were controlled by adjusting the dosage of the ethanolic Cu2+ precursor solution. Surface morphology, structure, crystal phase, chemical composition, and electrocatalytic properties of the nanoCuBi2O4|CuO were characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, cyclic voltammetry, linear sweep voltammetry, and chronoamperometry. It was found that both CuO and CuBi2O4 are active in electrocatalyzing the oxidation of glucose, but the porous structure of nanoCuBi2O4|CuO along with the synergistic catalytic enhancement, exerted by CuBi2O4 and CuO, renders nanoCuBi2O4|CuO superior electrocatalytic activity than CuO or CuBi2O4 alone. The mechanism of electrocatalytic oxidation of glucose on nanoCuBi2O4|CuO is proposed. Finally, the sensing characteristics of nanoCuBi2O4|CuO was evaluated, and the results indicate nanoCuBi2O4|CuO is a promising sensing material for the electrochemical detection of glucose.

原文English
頁(從 - 到)129-140
頁數12
期刊Electrochimica Acta
229
DOIs
出版狀態Published - 2017 三月 1

指紋

Glucose
Nanoparticles
Oxidation
Chronoamperometry
Nanosheets
Electrocatalysts
Voltammetry
Tin oxides
Cyclic voltammetry
Surface morphology
Casting
Crystal structure
Heat treatment
Transmission electron microscopy
X ray diffraction
Glass
Scanning electron microscopy
Electrodes
Substrates
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Electrochemistry

引用此文

@article{6a711dba52884849b25845075902c89e,
title = "CuO nanoparticles decorated nano-dendrite-structured CuBi2O4 for highly sensitive and selective electrochemical detection of glucose",
abstract = "In this study, a chemically modified electrode, consisting of CuO nanoparticles decorated nano-dendrite-structured CuBi2O4 (nanoCuBi2O4|CuO), was fabricated and its application as an electrocatalyst in catalyzing the oxidation of glucose was investigated. nanoCuBi2O4|CuO was fabricated by firstly electrodepositing BiOI nanosheet array (nanoBiOI) on the flourine-doped tin oxide coated glass substrate, followed by its conversion into nanoCuBi2O4|CuO via drop-casting an ethanolic Cu2+ solution and follow-up thermal treatment. The degree of conversion of nanoBiOI into nanoCuBi2O4|CuO and electrocatalytic activites of resultant nanoCuBi2O4|CuO were controlled by adjusting the dosage of the ethanolic Cu2+ precursor solution. Surface morphology, structure, crystal phase, chemical composition, and electrocatalytic properties of the nanoCuBi2O4|CuO were characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, cyclic voltammetry, linear sweep voltammetry, and chronoamperometry. It was found that both CuO and CuBi2O4 are active in electrocatalyzing the oxidation of glucose, but the porous structure of nanoCuBi2O4|CuO along with the synergistic catalytic enhancement, exerted by CuBi2O4 and CuO, renders nanoCuBi2O4|CuO superior electrocatalytic activity than CuO or CuBi2O4 alone. The mechanism of electrocatalytic oxidation of glucose on nanoCuBi2O4|CuO is proposed. Finally, the sensing characteristics of nanoCuBi2O4|CuO was evaluated, and the results indicate nanoCuBi2O4|CuO is a promising sensing material for the electrochemical detection of glucose.",
author = "Wu, {Cheng Hsien} and Emeline Onno and Chia-Yu Lin",
year = "2017",
month = "3",
day = "1",
doi = "10.1016/j.electacta.2017.01.130",
language = "English",
volume = "229",
pages = "129--140",
journal = "Electrochimica Acta",
issn = "0013-4686",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - CuO nanoparticles decorated nano-dendrite-structured CuBi2O4 for highly sensitive and selective electrochemical detection of glucose

AU - Wu, Cheng Hsien

AU - Onno, Emeline

AU - Lin, Chia-Yu

PY - 2017/3/1

Y1 - 2017/3/1

N2 - In this study, a chemically modified electrode, consisting of CuO nanoparticles decorated nano-dendrite-structured CuBi2O4 (nanoCuBi2O4|CuO), was fabricated and its application as an electrocatalyst in catalyzing the oxidation of glucose was investigated. nanoCuBi2O4|CuO was fabricated by firstly electrodepositing BiOI nanosheet array (nanoBiOI) on the flourine-doped tin oxide coated glass substrate, followed by its conversion into nanoCuBi2O4|CuO via drop-casting an ethanolic Cu2+ solution and follow-up thermal treatment. The degree of conversion of nanoBiOI into nanoCuBi2O4|CuO and electrocatalytic activites of resultant nanoCuBi2O4|CuO were controlled by adjusting the dosage of the ethanolic Cu2+ precursor solution. Surface morphology, structure, crystal phase, chemical composition, and electrocatalytic properties of the nanoCuBi2O4|CuO were characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, cyclic voltammetry, linear sweep voltammetry, and chronoamperometry. It was found that both CuO and CuBi2O4 are active in electrocatalyzing the oxidation of glucose, but the porous structure of nanoCuBi2O4|CuO along with the synergistic catalytic enhancement, exerted by CuBi2O4 and CuO, renders nanoCuBi2O4|CuO superior electrocatalytic activity than CuO or CuBi2O4 alone. The mechanism of electrocatalytic oxidation of glucose on nanoCuBi2O4|CuO is proposed. Finally, the sensing characteristics of nanoCuBi2O4|CuO was evaluated, and the results indicate nanoCuBi2O4|CuO is a promising sensing material for the electrochemical detection of glucose.

AB - In this study, a chemically modified electrode, consisting of CuO nanoparticles decorated nano-dendrite-structured CuBi2O4 (nanoCuBi2O4|CuO), was fabricated and its application as an electrocatalyst in catalyzing the oxidation of glucose was investigated. nanoCuBi2O4|CuO was fabricated by firstly electrodepositing BiOI nanosheet array (nanoBiOI) on the flourine-doped tin oxide coated glass substrate, followed by its conversion into nanoCuBi2O4|CuO via drop-casting an ethanolic Cu2+ solution and follow-up thermal treatment. The degree of conversion of nanoBiOI into nanoCuBi2O4|CuO and electrocatalytic activites of resultant nanoCuBi2O4|CuO were controlled by adjusting the dosage of the ethanolic Cu2+ precursor solution. Surface morphology, structure, crystal phase, chemical composition, and electrocatalytic properties of the nanoCuBi2O4|CuO were characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, cyclic voltammetry, linear sweep voltammetry, and chronoamperometry. It was found that both CuO and CuBi2O4 are active in electrocatalyzing the oxidation of glucose, but the porous structure of nanoCuBi2O4|CuO along with the synergistic catalytic enhancement, exerted by CuBi2O4 and CuO, renders nanoCuBi2O4|CuO superior electrocatalytic activity than CuO or CuBi2O4 alone. The mechanism of electrocatalytic oxidation of glucose on nanoCuBi2O4|CuO is proposed. Finally, the sensing characteristics of nanoCuBi2O4|CuO was evaluated, and the results indicate nanoCuBi2O4|CuO is a promising sensing material for the electrochemical detection of glucose.

UR - http://www.scopus.com/inward/record.url?scp=85010666394&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85010666394&partnerID=8YFLogxK

U2 - 10.1016/j.electacta.2017.01.130

DO - 10.1016/j.electacta.2017.01.130

M3 - Article

AN - SCOPUS:85010666394

VL - 229

SP - 129

EP - 140

JO - Electrochimica Acta

JF - Electrochimica Acta

SN - 0013-4686

ER -