Cutting torque feedback control for thin-wall conical workpieces

Mu Ping Tsai, Nan Chyuan Tsai, Cheng Wei Yeh

研究成果: Article

摘要

An innovative approach of online cutting torque estimation and real-time feedback control for thin-wall tubular geometry workpieces is proposed and verified by experiments. This research is focused on how to formulate the appropriate applied cutting torque estimated by the feedback of current to spindle motor during milling process so that the milling cycle can be greatly reduced. On the other hand, a few suitable cutting conditions to prevent potential break/crack of thin-wall workpieces that enhance productivity but almost retain the same cutting quality are addressed as well. To achieve these goals, the milling dynamics of the thin-wall tubular geometry workpieces, including milling vibration and static deflection, is constructed at first. Based on the dynamic model, a fuzzy adaptive torque tuning (FATT) control strategy is synthesized to adaptively maximize the vertical feed rate under the constraint of preset upper limit of surface profile error on workpieces. Finally, the milling experiments and surface profile error measurements for the thin-wall tubular geometry workpiece have been undertaken to examine the effectiveness of proposed FATT strategy. Compared with constant cutting torque policy, it is observed that the vertical feed rate can be increased by 230 % under FATT. It implies that the required milling cycle is greatly shortened more than 70 % while the corresponding cutting accuracy upon finish of workpiece can be almost retained.

原文English
頁(從 - 到)1177-1185
頁數9
期刊International Journal of Advanced Manufacturing Technology
85
發行號5-8
DOIs
出版狀態Published - 2016 七月 1

指紋

Torque control
Feedback control
Torque
Tuning
Geometry
Real time control
Measurement errors
Dynamic models
Productivity
Experiments
Cracks
Feedback

All Science Journal Classification (ASJC) codes

  • Control and Systems Engineering
  • Software
  • Mechanical Engineering
  • Computer Science Applications
  • Industrial and Manufacturing Engineering

引用此文

@article{0497951def1c4872bf68f9bead41c378,
title = "Cutting torque feedback control for thin-wall conical workpieces",
abstract = "An innovative approach of online cutting torque estimation and real-time feedback control for thin-wall tubular geometry workpieces is proposed and verified by experiments. This research is focused on how to formulate the appropriate applied cutting torque estimated by the feedback of current to spindle motor during milling process so that the milling cycle can be greatly reduced. On the other hand, a few suitable cutting conditions to prevent potential break/crack of thin-wall workpieces that enhance productivity but almost retain the same cutting quality are addressed as well. To achieve these goals, the milling dynamics of the thin-wall tubular geometry workpieces, including milling vibration and static deflection, is constructed at first. Based on the dynamic model, a fuzzy adaptive torque tuning (FATT) control strategy is synthesized to adaptively maximize the vertical feed rate under the constraint of preset upper limit of surface profile error on workpieces. Finally, the milling experiments and surface profile error measurements for the thin-wall tubular geometry workpiece have been undertaken to examine the effectiveness of proposed FATT strategy. Compared with constant cutting torque policy, it is observed that the vertical feed rate can be increased by 230 {\%} under FATT. It implies that the required milling cycle is greatly shortened more than 70 {\%} while the corresponding cutting accuracy upon finish of workpiece can be almost retained.",
author = "Tsai, {Mu Ping} and Tsai, {Nan Chyuan} and Yeh, {Cheng Wei}",
year = "2016",
month = "7",
day = "1",
doi = "10.1007/s00170-015-8009-y",
language = "English",
volume = "85",
pages = "1177--1185",
journal = "International Journal of Advanced Manufacturing Technology",
issn = "0268-3768",
publisher = "Springer London",
number = "5-8",

}

Cutting torque feedback control for thin-wall conical workpieces. / Tsai, Mu Ping; Tsai, Nan Chyuan; Yeh, Cheng Wei.

於: International Journal of Advanced Manufacturing Technology, 卷 85, 編號 5-8, 01.07.2016, p. 1177-1185.

研究成果: Article

TY - JOUR

T1 - Cutting torque feedback control for thin-wall conical workpieces

AU - Tsai, Mu Ping

AU - Tsai, Nan Chyuan

AU - Yeh, Cheng Wei

PY - 2016/7/1

Y1 - 2016/7/1

N2 - An innovative approach of online cutting torque estimation and real-time feedback control for thin-wall tubular geometry workpieces is proposed and verified by experiments. This research is focused on how to formulate the appropriate applied cutting torque estimated by the feedback of current to spindle motor during milling process so that the milling cycle can be greatly reduced. On the other hand, a few suitable cutting conditions to prevent potential break/crack of thin-wall workpieces that enhance productivity but almost retain the same cutting quality are addressed as well. To achieve these goals, the milling dynamics of the thin-wall tubular geometry workpieces, including milling vibration and static deflection, is constructed at first. Based on the dynamic model, a fuzzy adaptive torque tuning (FATT) control strategy is synthesized to adaptively maximize the vertical feed rate under the constraint of preset upper limit of surface profile error on workpieces. Finally, the milling experiments and surface profile error measurements for the thin-wall tubular geometry workpiece have been undertaken to examine the effectiveness of proposed FATT strategy. Compared with constant cutting torque policy, it is observed that the vertical feed rate can be increased by 230 % under FATT. It implies that the required milling cycle is greatly shortened more than 70 % while the corresponding cutting accuracy upon finish of workpiece can be almost retained.

AB - An innovative approach of online cutting torque estimation and real-time feedback control for thin-wall tubular geometry workpieces is proposed and verified by experiments. This research is focused on how to formulate the appropriate applied cutting torque estimated by the feedback of current to spindle motor during milling process so that the milling cycle can be greatly reduced. On the other hand, a few suitable cutting conditions to prevent potential break/crack of thin-wall workpieces that enhance productivity but almost retain the same cutting quality are addressed as well. To achieve these goals, the milling dynamics of the thin-wall tubular geometry workpieces, including milling vibration and static deflection, is constructed at first. Based on the dynamic model, a fuzzy adaptive torque tuning (FATT) control strategy is synthesized to adaptively maximize the vertical feed rate under the constraint of preset upper limit of surface profile error on workpieces. Finally, the milling experiments and surface profile error measurements for the thin-wall tubular geometry workpiece have been undertaken to examine the effectiveness of proposed FATT strategy. Compared with constant cutting torque policy, it is observed that the vertical feed rate can be increased by 230 % under FATT. It implies that the required milling cycle is greatly shortened more than 70 % while the corresponding cutting accuracy upon finish of workpiece can be almost retained.

UR - http://www.scopus.com/inward/record.url?scp=84946143774&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84946143774&partnerID=8YFLogxK

U2 - 10.1007/s00170-015-8009-y

DO - 10.1007/s00170-015-8009-y

M3 - Article

AN - SCOPUS:84946143774

VL - 85

SP - 1177

EP - 1185

JO - International Journal of Advanced Manufacturing Technology

JF - International Journal of Advanced Manufacturing Technology

SN - 0268-3768

IS - 5-8

ER -