Design and implementation of frequency-modulated electronic ballast for metal-halide lamps

研究成果: Article同行評審

11 引文 斯高帕斯(Scopus)


A two-stage, frequency-modulated (FM), high-frequency-driven electronic ballast for metal-halide (MH) lamps is proposed. The presented ballast consists of a power-factor-correction (PFC) converter as the first stage, a half-bridge series-resonant parallel-loaded (HB-SRPL) inverter as the second stage, and a frequency-modulation controller. The advantageous features of the high-frequency-operated ballast are its compact size and reduced weight. With constant-frequency control, the switching frequency of the ballast must be carefully designed within a frequency window that is free from acoustic resonance, and the envelope of the lamp current is large owing to the DC-bus voltage ripple that occurs on the PFC output. However, if the switching frequency of the inverter is operated outside of the stable operation window or if the energy of some eigenfrequency is sufficiently higher, then acoustic resonances will exist. An FM-controlled electronic ballast for MH lamps is proposed. The switching frequency of the HB-SRPL inverter, whose centre frequency is intentionally designed at a frequency at which acoustic resonances occur, is periodically modulated by the voltage ripples of the PFC output. The presented ballast offers a lower envelope of lamp current in order to expand the power spectrum of the lamp and to decrease the energy of the eigenfrequency that supplies the lamp. Owing to its FM operation that allows for an adequately modulated index, no acoustic resonance occurs. The ballast offers cost-effectiveness, a simple control circuit without an external modulation signal, and a low crest factor (<1.45). Design guidelines and experimental results are presented for a 70W MH lamp ballast that utilises the FM control method with universal-line input voltage.

頁(從 - 到)702-710
期刊IEE Proceedings: Electric Power Applications
出版狀態Published - 2006 10月 9

All Science Journal Classification (ASJC) codes

  • 電氣與電子工程


深入研究「Design and implementation of frequency-modulated electronic ballast for metal-halide lamps」主題。共同形成了獨特的指紋。