TY - GEN
T1 - Design and Implementation of Two-Stage Boost and Full-Bridge Resonant Converter for Wide-Range APMs
AU - Chen, Chia Yu
AU - Liang, Tsorng Juu
AU - Liao, Kuo Fu
AU - Chen, Kai Hui
AU - Yeoh, Yeow Heng
N1 - Funding Information:
This paper was supported by the Ministry of Science and Technology in Taiwan under project number MOST 110-3116-F-006-002-, and 110-2221-E-006-123-MY3 and Hierarchical Green-Energy Materials Research Center.
Publisher Copyright:
© 2021 IEEE.
PY - 2021
Y1 - 2021
N2 - In the application of electric vehicle battery systems,an auxiliary power module with wide range is required to convert the high-voltage battery pack to the low-voltage auxiliary battery. A two-stage converter with wide-range is implemented with silicon carbide power devices in this paper. The first stage is a boost converter and the second stage is a full-bridge resonant converter. According to the output voltage range of the system,the corresponding output voltage range through pulse width modulation control is designed for the first-stage converter. In this way,the second-stage converter can be operated through near series resonant frequency control,the magnetizing inductance can be designed to be large to reduce circulating current,and with the synchronous rectification technology of the secondary side,the overall system efficiency can be improved. In this paper,a prototype with input voltage (VH) 220-450 V,output voltage (VL) 9-16 V,and rated power 2.5 kW is built with a digital signal processor TMS320F28335. As the experimental results shown,the maximum efficiency of the system is 97.74% with VH = 450 V and VL = 9 V at 20% load condition.
AB - In the application of electric vehicle battery systems,an auxiliary power module with wide range is required to convert the high-voltage battery pack to the low-voltage auxiliary battery. A two-stage converter with wide-range is implemented with silicon carbide power devices in this paper. The first stage is a boost converter and the second stage is a full-bridge resonant converter. According to the output voltage range of the system,the corresponding output voltage range through pulse width modulation control is designed for the first-stage converter. In this way,the second-stage converter can be operated through near series resonant frequency control,the magnetizing inductance can be designed to be large to reduce circulating current,and with the synchronous rectification technology of the secondary side,the overall system efficiency can be improved. In this paper,a prototype with input voltage (VH) 220-450 V,output voltage (VL) 9-16 V,and rated power 2.5 kW is built with a digital signal processor TMS320F28335. As the experimental results shown,the maximum efficiency of the system is 97.74% with VH = 450 V and VL = 9 V at 20% load condition.
UR - http://www.scopus.com/inward/record.url?scp=85124914992&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85124914992&partnerID=8YFLogxK
U2 - 10.1109/IFEEC53238.2021.9662017
DO - 10.1109/IFEEC53238.2021.9662017
M3 - Conference contribution
AN - SCOPUS:85124914992
T3 - 2021 IEEE International Future Energy Electronics Conference, IFEEC 2021
BT - 2021 IEEE International Future Energy Electronics Conference, IFEEC 2021
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2021 IEEE International Future Energy Electronics Conference, IFEEC 2021
Y2 - 16 November 2021 through 19 November 2021
ER -