Design of wide-supply-voltage-range bandgap reference circuits for voltage regulators

Ming Hsien Shih, Hung Hsien Wu, Chia-Ling Wei

研究成果: Conference contribution

3 引文 斯高帕斯(Scopus)

摘要

Bandgap voltage is typically used as the reference voltage of voltage regulators, such as dc-dc converters. Two high-precision CMOS bandgap reference circuits, labeled as current-mode and voltage-mode bandgap circuits, are proposed. The voltage-mode bandgap circuit can work with the supply voltage ranging from 2.5 V to 5V, while the current-mode bandgap works from 1.8 V to 5V. Both of them were designed and fabricated by using the TSMC 0.35-μm CMOS 3.3V/5V mixed-signal 2P4M polycide process. The measured temperature coefficient of the voltage-mode bandgap is 8.6 ppm/°C when supplied by a 5-V voltage. The measured line regulation of the voltage-mode bandgap is 0.16%/V, while that of the current-mode one is 0.13%/V.

原文English
主出版物標題2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017
發行者Institute of Electrical and Electronics Engineers Inc.
頁面1867-1871
頁數5
ISBN(電子)9781509051571
DOIs
出版狀態Published - 2017 七月 25
事件3rd IEEE International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017 - Kaohsiung, Taiwan
持續時間: 2017 六月 32017 六月 7

Other

Other3rd IEEE International Future Energy Electronics Conference and ECCE Asia, IFEEC - ECCE Asia 2017
國家/地區Taiwan
城市Kaohsiung
期間17-06-0317-06-07

All Science Journal Classification (ASJC) codes

  • 能源工程與電力技術
  • 電氣與電子工程
  • 控制和優化

指紋

深入研究「Design of wide-supply-voltage-range bandgap reference circuits for voltage regulators」主題。共同形成了獨特的指紋。

引用此