多孔式指向性地表風速計之開發與風洞實驗應用

研究成果: Article同行評審

摘要

The Irwin wind sensor has been widely used for measuring mean and fluctuating wind speed near the ground surface for evaluation of pedestrian-level wind condition. Because of its simple design, the Irwin wind sensor is not capable to extracting the wind direction information from the pressure difference between sensor top and ground level in wind tunnel experiment. A new-type directional Irwin wind sensor (DIWS) for measuring pedestrian-level wind speeds and wind direction simultaneously in wind tunnel is described. Similar to the Irwin wind sensor, it is axisymmetric and a series of holes (four, five and six holes) connected to pressure tubes have been set just on the probe surface in specific distance to the central tube. The calibration of wind speed refers to Irwin wind sensor literature, and the determination of wind direction needs to be calibrated by comparing mean pressure differences between all the surface tubes and the central tube at each wind direction (0° to 360°, interval of 10°). In uniform flow condition, by performing wind tunnel experiments with the directional Irwin wind sensor in three series of holes cases, the performance of the sensor will be investigated. The calibration formulae for all the parameter cases can be adopted as a database for further relative research and commercial test facilities.

貢獻的翻譯標題Development and Wind Tunnel Experimental Application of Multi-Hole Type Directional Irwin Wind Sensor
原文???core.languages.zh_ZH???
頁(從 - 到)693-701
頁數9
期刊Journal of the Chinese Institute of Civil and Hydraulic Engineering
31
發行號8
DOIs
出版狀態Published - 2019 十二月 1

All Science Journal Classification (ASJC) codes

  • 土木與結構工程

指紋

深入研究「多孔式指向性地表風速計之開發與風洞實驗應用」主題。共同形成了獨特的指紋。

引用此