Development of a Large-Format UAS Imaging System with the Construction of a One Sensor Geometry from a Multicamera Array

Jiann-Yeou Rau, Jyun Ping Jhan, Yi Tang Li

研究成果: Article

6 引文 (Scopus)

摘要

For the purpose of large-Area topographic mapping, this study proposes an imaging system based on a multicamera array unmanned aerial system (UAS) comprised of five small-format digital cameras with a total field of view of 127 ^{\circ}. The five digital cameras are aligned in a row along the across-Track direction with overlap between two neighboring cameras. The suggested system has higher data acquisition efficiency than the single-camera UAS imaging system. For topographic mapping purposes, we develop a modified projective transformation method to stitch all five raw images into one sensor geometry. In this method, the transformation coefficients are obtained by on-The-job multicamera self-calibration, including interior and relative orientations. During the stitching process, two systematic errors are detected and corrected. In the end, a large-format digital image can be produced for each trigger event independently. The photogrammetric collinearity condition is evaluated using several external accuracy assessments, such as conventional aerial triangulation, stereoplotting, and digital surface model generation procedures. From the accuracy assessment results, we conclude that the presented raw image stitching method can be used to construct a one sensor geometry from a multicamera array and is feasible for 3-D mapping applications.

原文English
文章編號7498673
頁(從 - 到)5925-5934
頁數10
期刊IEEE Transactions on Geoscience and Remote Sensing
54
發行號10
DOIs
出版狀態Published - 2016 十月 1

指紋

Imaging systems
topographic mapping
accuracy assessment
Digital cameras
Antennas
sensor
geometry
Geometry
Sensors
Cameras
aerial triangulation
Systematic errors
Triangulation
digital image
field of view
data acquisition
Data acquisition
Calibration
calibration
method

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Earth and Planetary Sciences(all)

引用此文

@article{08b2088b896e40e287be2059650fb641,
title = "Development of a Large-Format UAS Imaging System with the Construction of a One Sensor Geometry from a Multicamera Array",
abstract = "For the purpose of large-Area topographic mapping, this study proposes an imaging system based on a multicamera array unmanned aerial system (UAS) comprised of five small-format digital cameras with a total field of view of 127 ^{\circ}. The five digital cameras are aligned in a row along the across-Track direction with overlap between two neighboring cameras. The suggested system has higher data acquisition efficiency than the single-camera UAS imaging system. For topographic mapping purposes, we develop a modified projective transformation method to stitch all five raw images into one sensor geometry. In this method, the transformation coefficients are obtained by on-The-job multicamera self-calibration, including interior and relative orientations. During the stitching process, two systematic errors are detected and corrected. In the end, a large-format digital image can be produced for each trigger event independently. The photogrammetric collinearity condition is evaluated using several external accuracy assessments, such as conventional aerial triangulation, stereoplotting, and digital surface model generation procedures. From the accuracy assessment results, we conclude that the presented raw image stitching method can be used to construct a one sensor geometry from a multicamera array and is feasible for 3-D mapping applications.",
author = "Jiann-Yeou Rau and Jhan, {Jyun Ping} and Li, {Yi Tang}",
year = "2016",
month = "10",
day = "1",
doi = "10.1109/TGRS.2016.2575066",
language = "English",
volume = "54",
pages = "5925--5934",
journal = "IEEE Transactions on Geoscience and Remote Sensing",
issn = "0196-2892",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "10",

}

TY - JOUR

T1 - Development of a Large-Format UAS Imaging System with the Construction of a One Sensor Geometry from a Multicamera Array

AU - Rau, Jiann-Yeou

AU - Jhan, Jyun Ping

AU - Li, Yi Tang

PY - 2016/10/1

Y1 - 2016/10/1

N2 - For the purpose of large-Area topographic mapping, this study proposes an imaging system based on a multicamera array unmanned aerial system (UAS) comprised of five small-format digital cameras with a total field of view of 127 ^{\circ}. The five digital cameras are aligned in a row along the across-Track direction with overlap between two neighboring cameras. The suggested system has higher data acquisition efficiency than the single-camera UAS imaging system. For topographic mapping purposes, we develop a modified projective transformation method to stitch all five raw images into one sensor geometry. In this method, the transformation coefficients are obtained by on-The-job multicamera self-calibration, including interior and relative orientations. During the stitching process, two systematic errors are detected and corrected. In the end, a large-format digital image can be produced for each trigger event independently. The photogrammetric collinearity condition is evaluated using several external accuracy assessments, such as conventional aerial triangulation, stereoplotting, and digital surface model generation procedures. From the accuracy assessment results, we conclude that the presented raw image stitching method can be used to construct a one sensor geometry from a multicamera array and is feasible for 3-D mapping applications.

AB - For the purpose of large-Area topographic mapping, this study proposes an imaging system based on a multicamera array unmanned aerial system (UAS) comprised of five small-format digital cameras with a total field of view of 127 ^{\circ}. The five digital cameras are aligned in a row along the across-Track direction with overlap between two neighboring cameras. The suggested system has higher data acquisition efficiency than the single-camera UAS imaging system. For topographic mapping purposes, we develop a modified projective transformation method to stitch all five raw images into one sensor geometry. In this method, the transformation coefficients are obtained by on-The-job multicamera self-calibration, including interior and relative orientations. During the stitching process, two systematic errors are detected and corrected. In the end, a large-format digital image can be produced for each trigger event independently. The photogrammetric collinearity condition is evaluated using several external accuracy assessments, such as conventional aerial triangulation, stereoplotting, and digital surface model generation procedures. From the accuracy assessment results, we conclude that the presented raw image stitching method can be used to construct a one sensor geometry from a multicamera array and is feasible for 3-D mapping applications.

UR - http://www.scopus.com/inward/record.url?scp=84976336943&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84976336943&partnerID=8YFLogxK

U2 - 10.1109/TGRS.2016.2575066

DO - 10.1109/TGRS.2016.2575066

M3 - Article

AN - SCOPUS:84976336943

VL - 54

SP - 5925

EP - 5934

JO - IEEE Transactions on Geoscience and Remote Sensing

JF - IEEE Transactions on Geoscience and Remote Sensing

SN - 0196-2892

IS - 10

M1 - 7498673

ER -