Development of Active Guide-wire for Cardiac Catheterization by Using Ionic Polymer-Metal Composites

B. K. Fang, M. S. Ju, C. C.K. Lin

研究成果: Conference contribution

5 引文 斯高帕斯(Scopus)

摘要

Due to the inconvenience in passing bifurcated blood vessels via changing curvature of guide-wires during surgery, active catheter or guide-wire systems are developed recently. For lightweight and large bending deformation, the ionic polymer metal composites (IPMCs) have been employed in many biomedical applications. For controlling an IPMCbased active cardiac guide-wire system, the goal of this research is to develop methods that can actuate an IPMC and detect its deformation without extra sensors. The method is to parallel a reference IPMC with an actuated IPMC. Then a mixed driving signal that consisted of high and low frequencies was applied to drive the IPMCs. The low frequency signal makes the IPMC to deform and change its surface electrical resistance, while the high frequency signal retains the deformation information. By utilizing a lock-in amplifier to demodulate the high frequency signal, the deformation can be measured. When low frequency actuation signal is absent, the sensing signal follows the deformation well. However, when sinusoidal or square wave actuation signals of frequency 0.1Hz was applied transient error appeared. The error may due to the mismatch of electric resistances and capacitances between the actuation and reference IPMCs. However, when the frequency of actuating signal was reduced to 0.01Hz, the transient error disappeared. For practical applications like catheter guide wire, a low frequency actuation signal induces a large deformation so the method might be feasible for simultaneously sensing and actuating an IPMC.

原文English
主出版物標題13th International Conference on Biomedical Engineering - ICBME 2008
頁面340-343
頁數4
DOIs
出版狀態Published - 2009 十二月 1
事件13th International Conference on Biomedical Engineering, ICBME 2008 - , Singapore
持續時間: 2008 十二月 32008 十二月 6

出版系列

名字IFMBE Proceedings
23
ISSN(列印)1680-0737

Other

Other13th International Conference on Biomedical Engineering, ICBME 2008
國家Singapore
期間08-12-0308-12-06

All Science Journal Classification (ASJC) codes

  • Bioengineering
  • Biomedical Engineering

指紋 深入研究「Development of Active Guide-wire for Cardiac Catheterization by Using Ionic Polymer-Metal Composites」主題。共同形成了獨特的指紋。

引用此