Direct injection of superheated steam for continuous hydrolysis reaction

Wei Cheng Wang, Timothy L. Turner, William L. Roberts, Larry F. Stikeleather

研究成果: Article同行評審

5 引文 斯高帕斯(Scopus)

摘要

The primary intent for previous continuous hydrolysis studies was to minimize the reaction temperature and reaction time. In this work, hydrolysis is the first step of a proprietary chemical process to convert lipids to sustainable, drop-in replacements for petroleum based fuels. To improve the economics of the process, attention is now focused on optimizing the energy efficiency of the process, maximizing the reaction rate, and improving the recovery of the glycerol by-product. A laboratory-scale reactor system has been designed and built with this goal in mind.Sweet water (water with glycerol from the hydrolysis reaction) is routed to a distillation column and heated above the boiling point of water at the reaction pressure. The steam pressure allows the steam to return to the reactor without pumping. Direct injection of steam into the hydrolysis reactor is shown to provide favorable equilibrium conditions resulting in a high quality of FFA product and rapid reaction rate, even without preheating the inlet water and oil and with lower reactor temperatures and lower fresh water demand. The high enthalpy of the steam provides energy for the hydrolysis reaction. Steam injection offers enhanced conditions for continuous hydrolysis of triglycerides to high-purity streams of FFA and glycerol.

原文English
頁(從 - 到)52-59
頁數8
期刊Chemical Engineering and Processing: Process Intensification
59
DOIs
出版狀態Published - 2012 九月 1

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)
  • Energy Engineering and Power Technology
  • Industrial and Manufacturing Engineering

指紋 深入研究「Direct injection of superheated steam for continuous hydrolysis reaction」主題。共同形成了獨特的指紋。

引用此