Does conductance catheter measurement system give consistent and reliable pressure-volume relations in rats

研究成果: Article

3 引文 (Scopus)

摘要

The conductance catheter technique was developed in the 1980s to measure instantaneous ventricular conductance. After converting measured conductance to volume signals by use of the classic Baan conductance-to-volume equation, real-time pressurevolume (PV) relations can be obtained. A nonlinear conductance-to-volume conversion equation was proposed by Wei in 2005 to improve the accuracy of the conductance catheter system. This study tested the in vivo applicability of the nonlinear conversion equation, particularly focusing on the effect of deviation in catheter position. By altering catheter position, PV loops obtained by using the classic Baans equation and the nonlinear equation were compared. The comparison results show that the nonlinear equation indeed compensates for the errors introduced by catheter position deviation, and gives more consistent and reliable PV relations. Moreover, the effect of variations in blood resistivity was analyzed. To obtain consistent and reliable PV relations, the nonlinear equation is suggested for use, and changes in blood resistivity should be carefully monitored.

原文English
文章編號5719160
頁(從 - 到)1804-1813
頁數10
期刊IEEE Transactions on Biomedical Engineering
58
發行號6
DOIs
出版狀態Published - 2011 六月 1

指紋

Catheters
Rats
Nonlinear equations
Blood

All Science Journal Classification (ASJC) codes

  • Biomedical Engineering

引用此文

@article{d33c5680b90344b9a025396319c57610,
title = "Does conductance catheter measurement system give consistent and reliable pressure-volume relations in rats",
abstract = "The conductance catheter technique was developed in the 1980s to measure instantaneous ventricular conductance. After converting measured conductance to volume signals by use of the classic Baan conductance-to-volume equation, real-time pressurevolume (PV) relations can be obtained. A nonlinear conductance-to-volume conversion equation was proposed by Wei in 2005 to improve the accuracy of the conductance catheter system. This study tested the in vivo applicability of the nonlinear conversion equation, particularly focusing on the effect of deviation in catheter position. By altering catheter position, PV loops obtained by using the classic Baans equation and the nonlinear equation were compared. The comparison results show that the nonlinear equation indeed compensates for the errors introduced by catheter position deviation, and gives more consistent and reliable PV relations. Moreover, the effect of variations in blood resistivity was analyzed. To obtain consistent and reliable PV relations, the nonlinear equation is suggested for use, and changes in blood resistivity should be carefully monitored.",
author = "Wei, {Chia Ling} and Kan, {Chung Dann} and Wang, {Jieh Neng} and Wang, {Yi Wen} and Chen, {Chin Hong} and Tsai, {Mei Ling}",
year = "2011",
month = "6",
day = "1",
doi = "10.1109/TBME.2011.2118210",
language = "English",
volume = "58",
pages = "1804--1813",
journal = "IEEE Transactions on Biomedical Engineering",
issn = "0018-9294",
publisher = "IEEE Computer Society",
number = "6",

}

TY - JOUR

T1 - Does conductance catheter measurement system give consistent and reliable pressure-volume relations in rats

AU - Wei, Chia Ling

AU - Kan, Chung Dann

AU - Wang, Jieh Neng

AU - Wang, Yi Wen

AU - Chen, Chin Hong

AU - Tsai, Mei Ling

PY - 2011/6/1

Y1 - 2011/6/1

N2 - The conductance catheter technique was developed in the 1980s to measure instantaneous ventricular conductance. After converting measured conductance to volume signals by use of the classic Baan conductance-to-volume equation, real-time pressurevolume (PV) relations can be obtained. A nonlinear conductance-to-volume conversion equation was proposed by Wei in 2005 to improve the accuracy of the conductance catheter system. This study tested the in vivo applicability of the nonlinear conversion equation, particularly focusing on the effect of deviation in catheter position. By altering catheter position, PV loops obtained by using the classic Baans equation and the nonlinear equation were compared. The comparison results show that the nonlinear equation indeed compensates for the errors introduced by catheter position deviation, and gives more consistent and reliable PV relations. Moreover, the effect of variations in blood resistivity was analyzed. To obtain consistent and reliable PV relations, the nonlinear equation is suggested for use, and changes in blood resistivity should be carefully monitored.

AB - The conductance catheter technique was developed in the 1980s to measure instantaneous ventricular conductance. After converting measured conductance to volume signals by use of the classic Baan conductance-to-volume equation, real-time pressurevolume (PV) relations can be obtained. A nonlinear conductance-to-volume conversion equation was proposed by Wei in 2005 to improve the accuracy of the conductance catheter system. This study tested the in vivo applicability of the nonlinear conversion equation, particularly focusing on the effect of deviation in catheter position. By altering catheter position, PV loops obtained by using the classic Baans equation and the nonlinear equation were compared. The comparison results show that the nonlinear equation indeed compensates for the errors introduced by catheter position deviation, and gives more consistent and reliable PV relations. Moreover, the effect of variations in blood resistivity was analyzed. To obtain consistent and reliable PV relations, the nonlinear equation is suggested for use, and changes in blood resistivity should be carefully monitored.

UR - http://www.scopus.com/inward/record.url?scp=79956355267&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79956355267&partnerID=8YFLogxK

U2 - 10.1109/TBME.2011.2118210

DO - 10.1109/TBME.2011.2118210

M3 - Article

C2 - 21342837

AN - SCOPUS:79956355267

VL - 58

SP - 1804

EP - 1813

JO - IEEE Transactions on Biomedical Engineering

JF - IEEE Transactions on Biomedical Engineering

SN - 0018-9294

IS - 6

M1 - 5719160

ER -