Dual mode digital buck converter controller without current sensor

Yu Lin Chen; Jiann Fuh Chen; Dai Wei Lai

doi:10.1109/IESES.2018.8349859

Dual mode digital buck converter controller without current sensor

Yu Lin Chen, Jiann Fuh Chen, Dai Wei Lai

電機工程學系

研究成果: Conference contribution

2 引文斯高帕斯（Scopus）

摘要

The common buck converter is used the pulse width modulation (PWM) mode under the heavy load and the pulse frequency modulation (PFM) mode under the light load to obtain the high efficiency. The control method, switching the PWM mode and the PFM mode automatically depend on the different loads, needs the current sensor to judge whether the inductor current is zero or not. The paper uses the no current sensing technology which switches the two modes automatically without the current sensor. Use the field programmable gate array (FPGA) to verify the functions and implement a buck converter which has 3∼4.2 V input voltage, 1.2 V output voltage and 86 % highest efficiency under 0.5 A output current. After the FPGA verification, the control circuit has been implemented in TSMC 1P6M 0.18 μm CMOS technology.

原文	English
主出版物標題	Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018
發行者	Institute of Electrical and Electronics Engineers Inc.
頁面	118-123
頁數	6
ISBN（電子）	9781509049745
DOIs	https://doi.org/10.1109/IESES.2018.8349859
出版狀態	Published - 2018 4月 25
事件	1st IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018 - Hamilton, New Zealand 持續時間: 2018 1月 30 → 2018 2月 2

出版系列

名字	Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018
卷	2018-January

Other

Other	1st IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018
國家/地區	New Zealand
城市	Hamilton
期間	18-01-30 → 18-02-02

All Science Journal Classification (ASJC) codes

電氣與電子工程
工業與製造工程
能源工程與電力技術
可再生能源、永續發展與環境

UN SDG

此研究成果有助於以下永續發展目標

存取文件

10.1109/IESES.2018.8349859

其它文件與鏈接

引用此

Chen, Y. L., Chen, J. F., & Lai, D. W. (2018). Dual mode digital buck converter controller without current sensor. 於 Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018 (頁 118-123). (Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018; 卷 2018-January). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IESES.2018.8349859

Chen, Yu Lin ; Chen, Jiann Fuh ; Lai, Dai Wei. / Dual mode digital buck converter controller without current sensor. Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018. Institute of Electrical and Electronics Engineers Inc., 2018. 頁 118-123 (Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018).

@inproceedings{bbff95f7b9e54f66ace1078514e01741,

title = "Dual mode digital buck converter controller without current sensor",

abstract = "The common buck converter is used the pulse width modulation (PWM) mode under the heavy load and the pulse frequency modulation (PFM) mode under the light load to obtain the high efficiency. The control method, switching the PWM mode and the PFM mode automatically depend on the different loads, needs the current sensor to judge whether the inductor current is zero or not. The paper uses the no current sensing technology which switches the two modes automatically without the current sensor. Use the field programmable gate array (FPGA) to verify the functions and implement a buck converter which has 3∼4.2 V input voltage, 1.2 V output voltage and 86 % highest efficiency under 0.5 A output current. After the FPGA verification, the control circuit has been implemented in TSMC 1P6M 0.18 μm CMOS technology.",

author = "Chen, {Yu Lin} and Chen, {Jiann Fuh} and Lai, {Dai Wei}",

year = "2018",

month = apr,

day = "25",

doi = "10.1109/IESES.2018.8349859",

language = "English",

series = "Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "118--123",

booktitle = "Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018",

address = "United States",

note = "1st IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018 ; Conference date: 30-01-2018 Through 02-02-2018",

}

Chen, YL, Chen, JF & Lai, DW 2018, Dual mode digital buck converter controller without current sensor. 於 Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018. Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018, 卷 2018-January, Institute of Electrical and Electronics Engineers Inc., 頁 118-123, 1st IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018, Hamilton, New Zealand, 18-01-30. https://doi.org/10.1109/IESES.2018.8349859

Dual mode digital buck converter controller without current sensor. / Chen, Yu Lin; Chen, Jiann Fuh; Lai, Dai Wei.
Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 118-123 (Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018; 卷 2018-January).

研究成果: Conference contribution

TY - GEN

T1 - Dual mode digital buck converter controller without current sensor

AU - Chen, Yu Lin

AU - Chen, Jiann Fuh

AU - Lai, Dai Wei

PY - 2018/4/25

Y1 - 2018/4/25

N2 - The common buck converter is used the pulse width modulation (PWM) mode under the heavy load and the pulse frequency modulation (PFM) mode under the light load to obtain the high efficiency. The control method, switching the PWM mode and the PFM mode automatically depend on the different loads, needs the current sensor to judge whether the inductor current is zero or not. The paper uses the no current sensing technology which switches the two modes automatically without the current sensor. Use the field programmable gate array (FPGA) to verify the functions and implement a buck converter which has 3∼4.2 V input voltage, 1.2 V output voltage and 86 % highest efficiency under 0.5 A output current. After the FPGA verification, the control circuit has been implemented in TSMC 1P6M 0.18 μm CMOS technology.

AB - The common buck converter is used the pulse width modulation (PWM) mode under the heavy load and the pulse frequency modulation (PFM) mode under the light load to obtain the high efficiency. The control method, switching the PWM mode and the PFM mode automatically depend on the different loads, needs the current sensor to judge whether the inductor current is zero or not. The paper uses the no current sensing technology which switches the two modes automatically without the current sensor. Use the field programmable gate array (FPGA) to verify the functions and implement a buck converter which has 3∼4.2 V input voltage, 1.2 V output voltage and 86 % highest efficiency under 0.5 A output current. After the FPGA verification, the control circuit has been implemented in TSMC 1P6M 0.18 μm CMOS technology.

UR - http://www.scopus.com/inward/record.url?scp=85048808206&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85048808206&partnerID=8YFLogxK

U2 - 10.1109/IESES.2018.8349859

DO - 10.1109/IESES.2018.8349859

M3 - Conference contribution

AN - SCOPUS:85048808206

T3 - Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018

SP - 118

EP - 123

BT - Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 1st IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018

Y2 - 30 January 2018 through 2 February 2018

ER -

Chen YL, Chen JF, Lai DW. Dual mode digital buck converter controller without current sensor. 於 Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 118-123. (Proceedings - 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems, IESES 2018). doi: 10.1109/IESES.2018.8349859

Dual mode digital buck converter controller without current sensor

摘要

出版系列

Other

All Science Journal Classification (ASJC) codes

UN SDG

存取文件

其它文件與鏈接

指紋

引用此