Effects of annealing pressure on microstructure and conversion efficiency for electrodeposited CuInSe2 absorbers

Wen Hsi Lee, Tsung Wei Chang, Yin Hsien Su

研究成果: Article同行評審

摘要

As-deposited CuInSe2 thin films by electrodeposition method are usually accompanied with amorphous structure which is regarded detrimental for solar cell conversion efficiency. In this work, we proposed an annealing method under high pressure for improving the conversion efficiency of electrodeposited CuInSe2 thin film solar cells, and the microstructure of high-pressure annealed CuInSe2 films were also investigated. The annealing pressure was set from 100 kPa to 250 kPa, and the annealed CuInSe2 thin films were then fabricated into solar cell using standard process. Field-emission scanning electron microscopy (FESEM) images show that CuInSe2 films with higher annealing pressure demonstrate denser and smoother surface morphology. Results from X-ray diffraction (XRD) and Raman spectra indicate that annealing under high pressure enhanced the (1 1 2) preferential orientation of CuInSe2 films and also eliminated binary Cu-Se phases. Finally, through annealing CuInSe2 absorber layer under 200 kPa, the fill factor of the CuInSe2 solar cell was found to be improved from 28.4% to 55% and the efficiency from 2.77% to 6.91%.

原文English
頁(從 - 到)773-779
頁數7
期刊Journal of Nanoscience and Nanotechnology
17
發行號1
DOIs
出版狀態Published - 2017 一月 1

All Science Journal Classification (ASJC) codes

  • Bioengineering
  • Chemistry(all)
  • Biomedical Engineering
  • Materials Science(all)
  • Condensed Matter Physics

指紋 深入研究「Effects of annealing pressure on microstructure and conversion efficiency for electrodeposited CuInSe<sub>2</sub> absorbers」主題。共同形成了獨特的指紋。

引用此