Effects of cutting conditions on dynamic cutting factor and process damping in milling

C. Y. Huang, J. J. Junz Wang

研究成果: Article同行評審

13 引文 斯高帕斯(Scopus)


This paper investigates how cutting conditions affect dynamic cutting factor and system process damping in a dynamic milling process. By considering variation of edge plowing force, a frequency domain method is presented to identify the dynamic cutting factor through measured vibration in a milling process, and cutting conditions most suitable for the identification experiments are also discussed. A series of experiments are carried out to investigate the effects of cutting conditions on the dynamic cutting factor. This factor is shown to be significantly affected by the cutting speed, but relatively independent of the feed per tooth and the radial depth of cut. An average process damping model is further constructed and shown to be effective in representing the time-varying damping function. The average process damping is shown to increase rapidly at lower cutting speed, but remain constant as the cutting speed beyond a critical value.

頁(從 - 到)320-330
期刊International Journal of Machine Tools and Manufacture
出版狀態Published - 2011 四月

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

指紋 深入研究「Effects of cutting conditions on dynamic cutting factor and process damping in milling」主題。共同形成了獨特的指紋。