Effects of deposition inclination angle on microstructure and electrical properties of al-doped ZnO coating films

Tse Chang Li, Chang Fu Han, Chung Jen Chung, Jen Fin Lin

研究成果: Article同行評審

1 引文 斯高帕斯(Scopus)

摘要

A flat plate in the deposition stage is designed to be tilted flexibly to form an inclination angle (θ) between an ion beam and the direction normal to a polyethylene terephthalate (PET) substrate. Five kinds of PET/aluminum-doped zinc oxide specimens were prepared to examine the effects of inclination angle on the microstructures, crystals, chemical compositions, and electrical properties. An increase in the inclination angle results in X-ray diffraction peak intensity variations in ZnO and a reduction in the composite d-spacing. As the measure of the oxygen vacancies, the O2-peak intensity ratio (IRO2) obtained using the X-ray photoelectron spectrometry (XPS) is evaluated. The IRO2 value increased with increasing the inclination angle, and it is proportional to the porosity integration over the visible light wavelengths. An increase in IRO2 is favorable for the reduction in composite grain size (gComposite). A smaller composite grain size (gComposite) of ZnO particles and a larger energy gap (Eg) can be obtained from applications of nonzero inclination angle. An appropriate nonzero inclination angle increases hardness and reduced elastic modulus and decreases the carrier concentration and carrier mobility of the specimen significantly.

原文English
頁(從 - 到)152-163
頁數12
期刊International Journal of Applied Ceramic Technology
13
發行號1
DOIs
出版狀態Published - 2016 一月 1

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Condensed Matter Physics
  • Marketing
  • Materials Chemistry

指紋 深入研究「Effects of deposition inclination angle on microstructure and electrical properties of al-doped ZnO coating films」主題。共同形成了獨特的指紋。

引用此