Effects of sintering temperature on the dielectric and piezoelectric properties of Sr additive Sm-modified PbTiO3 ceramics

Te Yi Chen, Sheng Yuan Chu, Yung Der Juang

研究成果: Article同行評審

44 引文 斯高帕斯(Scopus)

摘要

(Pb0.88-xSrxSm0.08)(Ti0.98Mn 0.02)O3 ceramics; x = 0.05-0.25 were prepared by conventional mixed-oxide technique, with sintering temperature at 1125-1250 °C. Microstructural and compositional analyses of these doped ceramics have been carried out using X-ray diffraction (XRD) and scanning electron microscope (SEM). The effects of dopants and the sintering temperature on the piezoelectric and dielectric properties of Sm-modified PbTiO3 ceramics have been investigated. We successfully showed that all Sr additive samples have maximum density and thickness electromechanical coupling coefficient, kt (>0.55) at 1200 °C sintering temperature, and still keep small planar electromechanical coupling coefficient, kp. In other words, the optimum sintering condition was found.

原文English
頁(從 - 到)6-10
頁數5
期刊Sensors and Actuators, A: Physical
102
發行號1-2
DOIs
出版狀態Published - 2002 12月 1

All Science Journal Classification (ASJC) codes

  • 電子、光磁材料
  • 儀器
  • 凝聚態物理學
  • 表面、塗料和薄膜
  • 金屬和合金
  • 電氣與電子工程

指紋

深入研究「Effects of sintering temperature on the dielectric and piezoelectric properties of Sr additive Sm-modified PbTiO3 ceramics」主題。共同形成了獨特的指紋。

引用此