Efficient overdetection elimination of acceptable faults for yield improvement

Kuen Jong Lee, Tong Yu Hsieh, Melvin A. Breuer

研究成果: Article同行評審

11 引文 斯高帕斯(Scopus)

摘要

Acceptable faults in a circuit under test (CUT) refer to those faults that have no or only minor impacts on the performance of the CUT. A circuit with an acceptable fault may be marketable for some specific applications. Therefore, by carefully dealing with these faults during testing, significant yield improvement can be achieved. Previous studies have shown that the patterns generated by a conventional automatic test pattern generation procedure to detect all unacceptable faults also detect many acceptable ones, resulting in a severe loss on achievable yield improvement. In this paper, we present a novel test methodology called multiple test set detection (MTSD) to totally eliminate this overdetection problem. A basic test set generation method is first presented, which depicts a fundamental scheme to generate appropriate test sets for MTSD. We then describe an enhanced test generation method that can significantly reduce the total number of test patterns. Solid theoretical derivations are provided to validate the effectiveness of the proposed methods. Experimental results show that in general an 80%-99% reduction in the number of test patterns can be achieved compared with previous work addressing this problem.

原文English
文章編號6186858
頁(從 - 到)754-764
頁數11
期刊IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
31
發行號5
DOIs
出版狀態Published - 2012 五月

All Science Journal Classification (ASJC) codes

  • 軟體
  • 電腦繪圖與電腦輔助設計
  • 電氣與電子工程

指紋

深入研究「Efficient overdetection elimination of acceptable faults for yield improvement」主題。共同形成了獨特的指紋。

引用此