Electrical properties of low-temperature-fired ferrite-dielectric composites

Hsing-I Hsiang, Tai How Chen

研究成果: Article同行評審

19 引文 斯高帕斯(Scopus)


The effects of the BaO·(Nd0.8Bi0.2)2O3·4TiO2 (BNBT) to NiCuZn ferrite ratio and addition of Bi2O3-B2O3-SiO2-ZnO (BBSZ) glass on the sintering behavior, microstructure evolution, dielectric and magnetic properties of BNBT-NiCuZn ferrite composites were investigated in developing low-temperature-fired composites for high frequency electromagnetic interference (EMI) devices. The results indicate that these composites can be densified at 900 °C and exhibit superior dielectric and magnetic properties with the addition of BBSZ glass. The dielectric system used in the ferrite-dielectric composites reported in the previous studies mostly belong to the ferroelectricity group, which are not suitable for use in the high frequency range (>800 MHz) due to the selfresonance frequency limit. In this study, the dielectric constant remains nearly a constant over a wide range of frequencies (100 MHz to 1 GHz) and the magnetic resonance frequencies are larger than 100 MHz for the BNBT + BBSZ glass-NiCuZn ferrite composites. Therefore, the BNBT + BBSZ glass-NiCuZn ferrite composites can be a good candidate material for high frequency EMI device applications.

頁(從 - 到)2035-2039
期刊Ceramics International
出版狀態Published - 2009 七月 1

All Science Journal Classification (ASJC) codes

  • 電子、光磁材料
  • 陶瓷和複合材料
  • 製程化學與技術
  • 表面、塗料和薄膜
  • 材料化學


深入研究「Electrical properties of low-temperature-fired ferrite-dielectric composites」主題。共同形成了獨特的指紋。