Electrodeposition of Al coating on Mg alloy from Al chloride/1-ethyl-3- methylimidazolium chloride ionic liquids with different Lewis acidity

J. K. Chang, I-Wen Sun, S. J. Pan, M. H. Chuang, M. J. Deng, Wen-Ta Tsai

研究成果: Article同行評審

18 引文 斯高帕斯(Scopus)

摘要

Electrodeposition of a metallic Al layer on a Mg alloy from a Lewis acidic Al chloride-1-ethyl-3-methylimidazolium chloride (EMIC) Ionic liquid has been carried out at room temperature. The effects of the AlCl3 to EMIC molar ratio, in the range from 50%-50% to 60%-40%, on the electrodeposition characteristics were investigated. Scanning electron microscopy, X-ray energy dispersive spectroscopy, and X-ray diffractometry were used to examine the surface morphology, the chemical composition, and the crystal structure of the deposited layers prepared in the ionic liquids with different AlCl3 to EMIC ratios. The improvement of corrosion resistance of a Mg alloy to the Al surface coating was also evaluated by means of various electrochemical methods. The electrochemical impedance spectroscopic data indicated that while a bare Mg alloy had a polarisation resistance of only 470 Ω cm2 in 3-5 wt-% NaCl solution, the Al coated sample deposited in the ionic liquid with 60%AlCl3 showed a resistance as high as 5200 Ω cm2 in the same environment.

原文English
頁(從 - 到)227-233
頁數7
期刊Transactions of the Institute of Metal Finishing
86
發行號4
DOIs
出版狀態Published - 2008 七月

All Science Journal Classification (ASJC) codes

  • 表面、塗料和薄膜
  • 表面和介面
  • 金屬和合金

指紋

深入研究「Electrodeposition of Al coating on Mg alloy from Al chloride/1-ethyl-3- methylimidazolium chloride ionic liquids with different Lewis acidity」主題。共同形成了獨特的指紋。

引用此