Electrodeposition of aluminum (Al) on magnesium (Mg) alloy in ionic liquid

W. T. Tsai, I. W. Sun

研究成果: Chapter

2 引文 斯高帕斯(Scopus)

摘要

To improve the corrosion resistance of magnesium (Mg) alloys, surface modification is applied in an attempt to produce a corrosion resistant barrier. In this chapter, a new method to deposit aluminum (Al) film on an Mg alloy surface is demonstrated. Electrodeposition of A1 on AZ91D Mg alloy, using an acidic aluminum chloride-1-ethyl-3-methylimidazolium chloride ionic liquid (AlCl3-EMIC), has been shown to be feasible. The existence of Al coating can cause a substantial increase in corrosion resistance, reducing the susceptibility of Mg alloy to aqueous corrosion. The results of electrochemical impedance spectroscopy show that Al coating leads to an increase in the polarization resistance of a bare Mg alloy by one order of magnitude in 3.5wt% NaCl solution. Furthermore, the potentiodynamic polarization results show that Al-coated Mg alloy can be passivated, and a wider passive region with a lower passive current density can be obtained if the Al is electrodeposited at a lower applied current or a low cathodic overpotential. The passivity of the co-deposited Al/Zn film is slightly inferior to that of the pure Al coating.

原文English
主出版物標題Corrosion of Magnesium Alloys
發行者Elsevier Inc.
頁面519-540
頁數22
ISBN(列印)9781845697082
DOIs
出版狀態Published - 2011 三月

All Science Journal Classification (ASJC) codes

  • 工程 (全部)

指紋

深入研究「Electrodeposition of aluminum (Al) on magnesium (Mg) alloy in ionic liquid」主題。共同形成了獨特的指紋。

引用此