Electrospray technique in fabricating perovskite-based hybrid solar cells under ambient conditions

Pei Ying Lin, Yueh Ying Chen, Tzung Fang Guo, Yaw Shyan Fu, Li Chung Lai, Chung Kwang Lee

研究成果: Article同行評審

18 引文 斯高帕斯(Scopus)


In this work, we utilized the electrospray technique to deposit the solidified crystal precursors on the substrate to investigate the transition processes in forming an orthorhombic methylammonium lead iodide film for fabricating perovskite planar heterojunction solar cells. The formation of solidified crystal precursors by the electrospray technique improves the de-wetting of the perovskite film on the substrate. Judicious selection of the applied voltage in the electrospray process generates crystal precursors of the appropriate dimensions. These as-electrosprayed crystals are the solid-state reactants for the halogen exchange and they form a uniformly covered film on the substrate under suitable annealing conditions. The hybrid device prepared by the electrospray technique exhibits a power conversion efficiency of 9.3%, a short-circuit current of 19.71 mA cm−2, an open-circuit voltage of 0.87 V, and a fill factor of 0.55. The electrospray technique with the solid-state reaction mechanism proposed in this paper would be ideal for the large-area coating of a perovskite active layer, and thus has potential for use in real mass production.

頁(從 - 到)10985-10991
期刊RSC Advances
出版狀態Published - 2017

All Science Journal Classification (ASJC) codes

  • 一般化學
  • 一般化學工程


深入研究「Electrospray technique in fabricating perovskite-based hybrid solar cells under ambient conditions」主題。共同形成了獨特的指紋。