Examination of DMT-based methods for evaluating the liquefaction potential of soils

Gordon Tung Chin Kung, Der Her Lee, Pai Hsiang Tsai

研究成果: Article同行評審

1 引文 斯高帕斯(Scopus)

摘要

The flat dilatometer test (DMT) has the potential to be a useful tool in the evaluation of liquefaction potential of soils. In practice, it is necessary to carefully examine existing DMT-based methods for evaluating liquefaction potential. We conducted the DMT and cone penetration test (CPT) in high liquefaction potential areas to examine the existing DMT-based methods for liquefaction potential evaluation. Specifically, the DMT and CPT were conducted side-by-side at each of six in-situ sites, and thus it is feasible to utilize those test results to validate the existing DMT-based methods. The DMT parameter, horizontal stress index (K D), is used as an indicator for estimating liquefaction resistance of soils in terms of cyclic resistance ratio (CRR). The analysis results revealed that the existing K D-based liquefaction evaluation methods would overestimate the CRR of soils, which leads to overestimation of the factor of safety against liquefaction. Also, the estimations of DMT-K D values by using the CPT-q c as well as the correlation between DMT-K D and CPT-q c proposed by the previous studies would be significantly smaller than field measurements. The results reflected that further validation of the existing DMT-based methods for liquefaction evaluation is desirable.

原文English
頁(從 - 到)807-817
頁數11
期刊Journal of Zhejiang University: Science A
12
發行號11
DOIs
出版狀態Published - 2011 十一月

All Science Journal Classification (ASJC) codes

  • 工程 (全部)

指紋

深入研究「Examination of DMT-based methods for evaluating the liquefaction potential of soils」主題。共同形成了獨特的指紋。

引用此