Experimental study of the flow rectification performance of conical diffuser valves

Yi Chun Wang, Hung Yi Chen, Yu Ying Hsiao

研究成果: Article同行評審

5 引文 斯高帕斯(Scopus)


Flow rectification performance of conical diffuser valves has been investigated experimentally. In order to quantify the valving capability of the diffuser, a diffuser performance test cell is designed. The main feature of the test cell is that the volume change of the pumping chamber is independent of the diffuser geometry and actuation frequency. Experiments have been carried out over a range of diffuser angles varying from 10° to 35° and Roshko numbers (based on diffuser throat diameter and actuation frequency) from 25 to 300. Results show that the valving performance of the diffuser is significantly affected by the tapered angle and Roshko number. The diffuser valve with diverging angle of 10° exhibits the best performance. This is consistent with our recent simulations. The maximum flow rectification efficiency that has been attained at condition of zero backpressure is around 48%. In addition, we have simultaneously measured the time-dependent pressure inside the actuation chamber. It is found that the variations of the pressure amplitude with the Roshko number are qualitatively similar to those of the valving efficiency; high rectification efficiencies are always associated with large actuation pressures. However, for a large actuation volume, the valve performance declines, even though the actuation pressure increases. A possible explanation for this phenomenon is also provided.

頁(從 - 到)15-27
期刊Acta Mechanica
出版狀態Published - 2011 6月

All Science Journal Classification (ASJC) codes

  • 計算力學
  • 機械工業


深入研究「Experimental study of the flow rectification performance of conical diffuser valves」主題。共同形成了獨特的指紋。