TY - JOUR
T1 - Extensibility of the supraspinatus muscle can be predicted by combining shear wave elastography and magnetic resonance imaging-measured quantitative metrics of stiffness and volumetric fat infiltration
T2 - A cadaveric study
AU - Giambini, Hugo
AU - Hatta, Taku
AU - Rezaei, Asghar
AU - An, Kai Nan
N1 - Publisher Copyright:
© 2018 Elsevier Ltd
PY - 2018/8
Y1 - 2018/8
N2 - Background: A torn rotator cuff tendon will retract over time causing changes in muscle properties and decreasing its extensibility, or deformation. During surgery, large tensile loads are applied to bring the torn tendon to the footprint. Poor muscle extensibility and large tensile stresses at the repair might lead to gap formation or re-tear of the repair. A quantitative evaluation of muscle properties could be used to predict the extensibility of the supraspinatus (SSP) muscle. Method: Magnetic resonance imaging (MRI)-measured volumetric fat fraction and shear wave elastography (SWE)-measured elastic modulus of the SSP muscle were obtained on seventeen cadaveric shoulders. Experimental extensibility and stiffness were then measured by axially pulling the tendon up-to 60 N. Univariate and multivariate analyses were used to determine the correlation and contribution of fat fraction and elastic modulus to experimental outcomes. Findings: SWE moduli negatively correlated with SSP muscle extensibility (r = 0.54–0.58, P ≤ 0.0259); fat fraction resulted in a positive correlation (r = 0.69, P = 0.0021). SWE measurements, solely, explained up to 34% and 33% of the variability in measured extensibility and stiffness, respectively. Fat Fraction, solely, explained 48% of the variability in extensibility and 36% of the variability in stiffness. These methods combined predicted up to 62% of the musculotendinous extensibility. Interpretation: This study showed a comprehensive quantitative assessment of SSP muscle properties using SWE to estimate stiffness and MRI to measure fatty infiltration. The extensibility of the detached muscle/tendon unit was highly correlated to material properties of the muscle when these methods were used in combination.
AB - Background: A torn rotator cuff tendon will retract over time causing changes in muscle properties and decreasing its extensibility, or deformation. During surgery, large tensile loads are applied to bring the torn tendon to the footprint. Poor muscle extensibility and large tensile stresses at the repair might lead to gap formation or re-tear of the repair. A quantitative evaluation of muscle properties could be used to predict the extensibility of the supraspinatus (SSP) muscle. Method: Magnetic resonance imaging (MRI)-measured volumetric fat fraction and shear wave elastography (SWE)-measured elastic modulus of the SSP muscle were obtained on seventeen cadaveric shoulders. Experimental extensibility and stiffness were then measured by axially pulling the tendon up-to 60 N. Univariate and multivariate analyses were used to determine the correlation and contribution of fat fraction and elastic modulus to experimental outcomes. Findings: SWE moduli negatively correlated with SSP muscle extensibility (r = 0.54–0.58, P ≤ 0.0259); fat fraction resulted in a positive correlation (r = 0.69, P = 0.0021). SWE measurements, solely, explained up to 34% and 33% of the variability in measured extensibility and stiffness, respectively. Fat Fraction, solely, explained 48% of the variability in extensibility and 36% of the variability in stiffness. These methods combined predicted up to 62% of the musculotendinous extensibility. Interpretation: This study showed a comprehensive quantitative assessment of SSP muscle properties using SWE to estimate stiffness and MRI to measure fatty infiltration. The extensibility of the detached muscle/tendon unit was highly correlated to material properties of the muscle when these methods were used in combination.
UR - http://www.scopus.com/inward/record.url?scp=85049489097&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85049489097&partnerID=8YFLogxK
U2 - 10.1016/j.clinbiomech.2018.07.001
DO - 10.1016/j.clinbiomech.2018.07.001
M3 - Article
C2 - 29986277
AN - SCOPUS:85049489097
SN - 0268-0033
VL - 57
SP - 144
EP - 149
JO - Clinical Biomechanics
JF - Clinical Biomechanics
ER -