Fabricating 20 cm × 20 cm porous template using anodic aluminum oxide

Kuan Wei Lee, Tsung Hsin Yang, Wei Lun Lu, Mau-phon Houng

研究成果: Conference article同行評審

2 引文 斯高帕斯(Scopus)


This paper proposes anodic aluminum oxide (AAO) on a 20 cm × 20 cm tin-doped indium oxide (ITO)/glass substrate by using an anodization process with a specially designed carrier. The proposed AAO can be used at a high applied bias (>110 V) to improve the uniformity of current density. The enhancement of light transmittance is observed by modulating the porous diameter. Therefore, the increased transmittance of AAO/ITO/glass with increased time of pore-widening treatment is attributed to the decreased refractive index of AAO film. By using pore-widening and post-annealing treatments, the morphologies and optical transmission spectra of AAO/ITO/glass were also examined.

頁(從 - 到)47-57
期刊Integrated Ferroelectrics
出版狀態Published - 2013 七月 16
事件International Conference on Information, Communication and Engineering 2012, ICICE 2012 - Fuzhou, China
持續時間: 2012 十二月 152012 十二月 20

All Science Journal Classification (ASJC) codes

  • 電子、光磁材料
  • 控制與系統工程
  • 陶瓷和複合材料
  • 凝聚態物理學
  • 電氣與電子工程
  • 材料化學


深入研究「Fabricating 20 cm × 20 cm porous template using anodic aluminum oxide」主題。共同形成了獨特的指紋。