Fatigue and wear testing of a non-constrained metacarpophalangeal prosthesis

John J. Grabowski; William H. Douglas; Ronald L. Linscheid; Kai Nan An

Fatigue and wear testing of a non-constrained metacarpophalangeal prosthesis

John J. Grabowski, William H. Douglas, Ronald L. Linscheid, Kai Nan An

前瞻醫療器材科技中心

研究成果: Paper › 同行評審

2 引文斯高帕斯（Scopus）

摘要

Protocols for conducting the mechanical evaluation of a non-constrained metacarpophalangeal (MCP) prosthesis for finger replacement were developed. Mechanical evaluation was conducted in two phases; fatigue testing at a fixed flexion angle of 30° and wear testing at flexion/extension angles from 0 to 90°. Upon the completion of both tests, the components and control specimens were again submitted for surface profiling. The change in component volume was determined by aligning and subtracting pre- and post-surface images.

原文	English
頁面	443-444
頁數	2
出版狀態	Published - 1995
事件	Proceedings of the 1995 Bioengineering Conference - Beever Creek, CO, USA 持續時間: 1995 6月 28 → 1995 7月 2

Conference

Conference	Proceedings of the 1995 Bioengineering Conference
城市	Beever Creek, CO, USA
期間	95-06-28 → 95-07-02

All Science Journal Classification (ASJC) codes

一般工程

其它文件與鏈接

Link to publication in Scopus

引用此

@conference{571768eabfbb4a61942f2de1480420ae,

title = "Fatigue and wear testing of a non-constrained metacarpophalangeal prosthesis",

abstract = "Protocols for conducting the mechanical evaluation of a non-constrained metacarpophalangeal (MCP) prosthesis for finger replacement were developed. Mechanical evaluation was conducted in two phases; fatigue testing at a fixed flexion angle of 30° and wear testing at flexion/extension angles from 0 to 90°. Upon the completion of both tests, the components and control specimens were again submitted for surface profiling. The change in component volume was determined by aligning and subtracting pre- and post-surface images.",

author = "Grabowski, {John J.} and Douglas, {William H.} and Linscheid, {Ronald L.} and An, {Kai Nan}",

year = "1995",

language = "English",

pages = "443--444",

}

TY - CONF

T1 - Fatigue and wear testing of a non-constrained metacarpophalangeal prosthesis

AU - Grabowski, John J.

AU - Douglas, William H.

AU - Linscheid, Ronald L.

AU - An, Kai Nan

PY - 1995

Y1 - 1995

N2 - Protocols for conducting the mechanical evaluation of a non-constrained metacarpophalangeal (MCP) prosthesis for finger replacement were developed. Mechanical evaluation was conducted in two phases; fatigue testing at a fixed flexion angle of 30° and wear testing at flexion/extension angles from 0 to 90°. Upon the completion of both tests, the components and control specimens were again submitted for surface profiling. The change in component volume was determined by aligning and subtracting pre- and post-surface images.

AB - Protocols for conducting the mechanical evaluation of a non-constrained metacarpophalangeal (MCP) prosthesis for finger replacement were developed. Mechanical evaluation was conducted in two phases; fatigue testing at a fixed flexion angle of 30° and wear testing at flexion/extension angles from 0 to 90°. Upon the completion of both tests, the components and control specimens were again submitted for surface profiling. The change in component volume was determined by aligning and subtracting pre- and post-surface images.

UR - http://www.scopus.com/inward/record.url?scp=0029224630&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029224630&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:0029224630

SP - 443

EP - 444

T2 - Proceedings of the 1995 Bioengineering Conference

Y2 - 28 June 1995 through 2 July 1995

ER -

Fatigue and wear testing of a non-constrained metacarpophalangeal prosthesis

摘要

Conference

All Science Journal Classification (ASJC) codes

其它文件與鏈接

指紋

引用此