Fatigue crack growth on the interface of copper and epoxy molding compound under mixed-mode loading

Yu Jen Chen, Yu An Deng, Tz Cheng Chiu

研究成果: Conference contribution

摘要

The fatigue growth of a crack on the interface of Cu and liquid epoxy molding compound (EMC) was investigated by using a novel mixed-mode bending test setup. In this setup, the mixed-mode loading is achieved by using two voice-coil motors for applying unequal end-loads on a split-beam specimen. The specimen consists of two oxygen-free Cu strips bonded by using EMC. By using an analytical formula based on the beam-on-elastic-foundation theory and compliance method, the crack length and the strain energy release rate are calculated from the crack-mouth opening displacement and the applied end forces. A real-time OS controller CompactRIO is used for the system control and data analysis. The control program calculates the crack length and phase angle for adjusting the applied force to maintain the prescribed mode mixity throughout the fatigue experiment. By post-processing the experiment results, the subcritical fatigue growth responses of the Cu-EMC interface were obtained. It was found that the steady-state cyclic fatigue delamination growth rate displays a power-law dependence on the applied strain energy release rate range. The measured fatigue growth characteristics may be further incorporate with the fracture mechanics analysis to predict the delamination growth on the interface of interest in a realistic structure.

原文English
主出版物標題13th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2018
發行者IEEE Computer Society
頁面139-142
頁數4
ISBN(電子)9781538656150
DOIs
出版狀態Published - 2019 一月 24
事件13th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2018 - Taipei, Taiwan
持續時間: 2018 十月 242018 十月 26

出版系列

名字Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT
2018-October
ISSN(列印)2150-5934
ISSN(電子)2150-5942

Conference

Conference13th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2018
國家Taiwan
城市Taipei
期間18-10-2418-10-26

All Science Journal Classification (ASJC) codes

  • Hardware and Architecture
  • Control and Systems Engineering
  • Electrical and Electronic Engineering

指紋 深入研究「Fatigue crack growth on the interface of copper and epoxy molding compound under mixed-mode loading」主題。共同形成了獨特的指紋。

  • 引用此

    Chen, Y. J., Deng, Y. A., & Chiu, T. C. (2019). Fatigue crack growth on the interface of copper and epoxy molding compound under mixed-mode loading. 於 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2018 (頁 139-142). [8625759] (Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT; 卷 2018-October). IEEE Computer Society. https://doi.org/10.1109/IMPACT.2018.8625759