Fe2O3 films on stainless steel for solar absorbers

Sean Wu, Chin Hsiang Cheng, Yu Jen Hsiao, Rei Cheng Juang, Wen Fu Wen

研究成果: Review article同行評審

25 引文 斯高帕斯(Scopus)

摘要

This paper reviews solar-selective coatings for concentrating solar power (CSP) applications. CSP systems require direct sunlight and solar tracking and utilize solar absorbers to convert sunlight to thermal electric power. Because this system receives direct sunlight which operating temperatures higher than 600 °C, heat-resistance new materials are needed to cope with. This paper presents a simple and low-cost process for depositing the high-temperature solar absorber. The high selective absorbing Fe2O3 films deposited on stainless steel (SS304) substrates to be absorbers by high thermal process at 850-1050 °C. The crystalline structure, surface microstructure and optic properties of the films were determined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV/visible spectroscopy (UV-vis-NIR Spectrophotometer, 0.25-2.5 μm). Optimal Fe2O3 films on SS304 substrates at (900-1000 °C) displayed high absorptivity (α) (0.909-0.922) and their emittance values(ε) are relatively low (0.18-0.38). This study proved the possibility of preparing high-temperature solar selective absorbing coatings with high solar absorptance and low emittance by using a simple thermal oxidation process. Those films have very good prospects for solar absorber because of simple process, low-cost, large-area and good performance.

原文English
頁(從 - 到)574-580
頁數7
期刊Renewable and Sustainable Energy Reviews
58
DOIs
出版狀態Published - 2016 五月

All Science Journal Classification (ASJC) codes

  • 可再生能源、永續發展與環境

指紋

深入研究「Fe<sub>2</sub>O<sub>3</sub> films on stainless steel for solar absorbers」主題。共同形成了獨特的指紋。

引用此