Forced convective heat transfer of parallel-mode reciprocating tube fitted with a twisted tape with application to piston cooling

研究成果: Article

8 引文 斯高帕斯(Scopus)

摘要

This experimental study, motivated by the need to improve the cooling performance of a piston in a marine propulsive diesel engine, investigated turbulent flow heat transfer in a reciprocating tube fitted with a twisted-tape insert. The nonreciprocating experimental data, obtained from the tube fitted with twisted tape, confirmed that heat-transfer augmentation from plain-tube level occurs. When the test tube reciprocated, buoyancy effects became appreciable, and interacted with the reciprocating and inertial forces to provide considerable heat transfer modifications from nonreciprocating situation. When the reciprocating forces were relatively weak, a range of heat-transfer impediments, that could reduce local Nusselt numbers to levels of about 53% of nonreciprocating values, was observed. A further increase of the relative strength of the reciprocating force resulted in a subsequent heat-transfer recovery, and eventually led to heat-transfer enhancements relative to the nonreciprocating situation. For design considerations, heat-transfer enhancement due to the twisted-tape insert was confirmed, but the impediments from non-reciprocating levels at lower values of pulsating numbers needs particular attention in order to avoid overheating situations.

原文English
頁(從 - 到)146-156
頁數11
期刊Journal of Engineering for Gas Turbines and Power
123
發行號1
DOIs
出版狀態Published - 2001 一月 1

All Science Journal Classification (ASJC) codes

  • Nuclear Energy and Engineering
  • Fuel Technology
  • Aerospace Engineering
  • Energy Engineering and Power Technology
  • Mechanical Engineering

指紋 深入研究「Forced convective heat transfer of parallel-mode reciprocating tube fitted with a twisted tape with application to piston cooling」主題。共同形成了獨特的指紋。

  • 引用此