High content Nd-Fe-B in polymer composite by fused depo-sition Modeling

T. Chang; J. K. Jyun; W. Lee; M. Tsai; C. Cheng

doi:10.1109/INTMAG.2018.8508341

High content Nd-Fe-B in polymer composite by fused depo-sition Modeling

T. Chang
, J. K. Jyun
, W. Lee
, M. Tsai
, C. Cheng

研究成果: Conference contribution

1 引文斯高帕斯（Scopus）

摘要

Fused Deposition Modeling (FDM) is a widespread method in 3D printing for its advantages of being less expensive, rapid, and easy to use. Therefore, the extrusion molding is adopted to manufacture the synthesis magnet powder and Acrylonitrile-Butadiene-Styrene (ABS) particles for the FDM. Compared to the properties of bonded-type magnetic devices, the magnetic properties, the quantity contained, and three-dimensional structure of hard magnetic composite materials are improved; thus, the applications of bonded-type magnets have expanded.

原文	English
主出版物標題	2018 IEEE International Magnetic Conference, INTERMAG 2018
發行者	Institute of Electrical and Electronics Engineers Inc.
ISBN（電子）	9781538664254
DOIs	https://doi.org/10.1109/INTMAG.2018.8508341
出版狀態	Published - 2018 10月 24
事件	2018 IEEE International Magnetic Conference, INTERMAG 2018 - Singapore, Singapore 持續時間: 2018 4月 23 → 2018 4月 27

出版系列

名字	2018 IEEE International Magnetic Conference, INTERMAG 2018

Conference

Conference	2018 IEEE International Magnetic Conference, INTERMAG 2018
國家/地區	Singapore
城市	Singapore
期間	18-04-23 → 18-04-27

UN SDG

此研究成果有助於以下永續發展目標

SDG 9 產業、創新與基礎設施

All Science Journal Classification (ASJC) codes

電子、光磁材料
儀器

存取文件

10.1109/INTMAG.2018.8508341

其它文件與鏈接

引用此

Chang, T., Jyun, J. K., Lee, W., Tsai, M., & Cheng, C. (2018). High content Nd-Fe-B in polymer composite by fused depo-sition Modeling. 於 2018 IEEE International Magnetic Conference, INTERMAG 2018 文章 8508341 (2018 IEEE International Magnetic Conference, INTERMAG 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/INTMAG.2018.8508341

@inproceedings{0936b43dfc6d4c488889a2d6f40abb69,

title = "High content Nd-Fe-B in polymer composite by fused depo-sition Modeling",

abstract = "Fused Deposition Modeling (FDM) is a widespread method in 3D printing for its advantages of being less expensive, rapid, and easy to use. Therefore, the extrusion molding is adopted to manufacture the synthesis magnet powder and Acrylonitrile-Butadiene-Styrene (ABS) particles for the FDM. Compared to the properties of bonded-type magnetic devices, the magnetic properties, the quantity contained, and three-dimensional structure of hard magnetic composite materials are improved; thus, the applications of bonded-type magnets have expanded.",

author = "T. Chang and Jyun, \{J. K.\} and W. Lee and M. Tsai and C. Cheng",

year = "2018",

month = oct,

day = "24",

doi = "10.1109/INTMAG.2018.8508341",

language = "English",

series = "2018 IEEE International Magnetic Conference, INTERMAG 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2018 IEEE International Magnetic Conference, INTERMAG 2018",

address = "United States",

note = "2018 IEEE International Magnetic Conference, INTERMAG 2018 ; Conference date: 23-04-2018 Through 27-04-2018",

}

Chang, T, Jyun, JK, Lee, W , Tsai, M & Cheng, C 2018, High content Nd-Fe-B in polymer composite by fused depo-sition Modeling. 於 2018 IEEE International Magnetic Conference, INTERMAG 2018., 8508341, 2018 IEEE International Magnetic Conference, INTERMAG 2018, Institute of Electrical and Electronics Engineers Inc., 2018 IEEE International Magnetic Conference, INTERMAG 2018, Singapore, Singapore, 18-04-23. https://doi.org/10.1109/INTMAG.2018.8508341

TY - GEN

T1 - High content Nd-Fe-B in polymer composite by fused depo-sition Modeling

AU - Chang, T.

AU - Jyun, J. K.

AU - Lee, W.

AU - Tsai, M.

AU - Cheng, C.

PY - 2018/10/24

Y1 - 2018/10/24

N2 - Fused Deposition Modeling (FDM) is a widespread method in 3D printing for its advantages of being less expensive, rapid, and easy to use. Therefore, the extrusion molding is adopted to manufacture the synthesis magnet powder and Acrylonitrile-Butadiene-Styrene (ABS) particles for the FDM. Compared to the properties of bonded-type magnetic devices, the magnetic properties, the quantity contained, and three-dimensional structure of hard magnetic composite materials are improved; thus, the applications of bonded-type magnets have expanded.

AB - Fused Deposition Modeling (FDM) is a widespread method in 3D printing for its advantages of being less expensive, rapid, and easy to use. Therefore, the extrusion molding is adopted to manufacture the synthesis magnet powder and Acrylonitrile-Butadiene-Styrene (ABS) particles for the FDM. Compared to the properties of bonded-type magnetic devices, the magnetic properties, the quantity contained, and three-dimensional structure of hard magnetic composite materials are improved; thus, the applications of bonded-type magnets have expanded.

UR - https://www.scopus.com/pages/publications/85066781887

UR - https://www.scopus.com/pages/publications/85066781887#tab=citedBy

U2 - 10.1109/INTMAG.2018.8508341

DO - 10.1109/INTMAG.2018.8508341

M3 - Conference contribution

AN - SCOPUS:85066781887

T3 - 2018 IEEE International Magnetic Conference, INTERMAG 2018

BT - 2018 IEEE International Magnetic Conference, INTERMAG 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2018 IEEE International Magnetic Conference, INTERMAG 2018

Y2 - 23 April 2018 through 27 April 2018

ER -

High content Nd-Fe-B in polymer composite by fused depo-sition Modeling

摘要

出版系列

Conference

UN SDG

All Science Journal Classification (ASJC) codes

存取文件

其它文件與鏈接

指紋

引用此