High-efficiency polymer light-emitting diode via Al interfacial modification using polyurethane

Sung Nien Hsieh, Tzu Yin Kuo, Ten Chin Wen, Tzung Fang Guo, Yuh Lang Lee

研究成果: Article同行評審

3 引文 斯高帕斯(Scopus)

摘要

An efficient polymer light-emitting diode (PLED) was fabricated by inserting polyurethane (PU) between a poly(2-methoxy-5-(2′-ethylhexyloxy)- 1,4-phenylene vinylene) layer and an Al cathode. The electroluminescence (EL) efficiency of the PU-based device can reach 1.27 cd/A, which is much higher than that of a device without PU (0.015 cd/A). The enhanced performance is attributed to both the hole-blocking capacity of the PU layer and the specific interaction between PU and the deposited Al, significantly facilitating the injection of electrons. Furthermore, the electron injection ability of PU-based devices was found to strongly depend on the thicknesses of the PU and Al layers.

原文English
頁(從 - 到)L773-L776
期刊Japanese Journal of Applied Physics
45
發行號29-32
DOIs
出版狀態Published - 2006 8月 11

All Science Journal Classification (ASJC) codes

  • 一般工程
  • 一般物理與天文學

指紋

深入研究「High-efficiency polymer light-emitting diode via Al interfacial modification using polyurethane」主題。共同形成了獨特的指紋。

引用此