High-temperature oxidation of a Sn-Zn-Al solder

Kwang Lung Lin, Tzy Ping Liu

研究成果: Article同行評審

100 引文 斯高帕斯(Scopus)

摘要

The oxidation of 91Sn-9(95Zn-5Al) solder in the liquid state, 250°C, was studied by thermal gravimetric analysis (TGA). The oxidation behavior of 63Sn-37Pb, 91Sn-9Zn, 99.4Sn-0.6Al, and Sn was also investigated for comparison. The weight gains per unit surface area descend in the order: 63 Sn-3 7Pb > Sn > 91 Sn-9Zn > 91Sn-9 (95Zn-SAl) > 99.4Sn-0.6Al. The initial weight gains of the materials investigated increase linearly with reaction time, while parabolic behavior exists after the linear stage. The rate constants of the oxidation reaction for the two reaction stages were determined. Activation energies for oxidation of the five materials were determined in the range of 250 to 400 C. The activation energies, derived from the linear rate constants for the early stages of oxidation, are 27.7 kJ/mole for 99.4Sn-0.6Al, 23.3 kJ/ mole for 91Sn-9Zn, 21.4 kJ/mole for 91Sn-9(95Zn-5Al), 20.5 kJ/mole for 63Sn-37Pb, and 19.8 kJ/mole for Sn. The surface-oxidation behavior was investigated further with electron spectroscopy for chemical analysis (ESCA) and Auger electron spectroscopy (AES). AES profiles showed that oxides of Zn and Al formed on 91Sn-9Zn and 91Sn-9(95Zn-5Al) solders, while tin oxide is formed on 63Sn-37Pb solder.

原文English
頁(從 - 到)255-267
頁數13
期刊Oxidation of Metals
50
發行號3-4
DOIs
出版狀態Published - 1998 1月 1

All Science Journal Classification (ASJC) codes

  • 無機化學
  • 金屬和合金
  • 材料化學

指紋

深入研究「High-temperature oxidation of a Sn-Zn-Al solder」主題。共同形成了獨特的指紋。

引用此