Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment

Vince William Carandang; Aristotle T. Ubando; Alvin B. Culaba

doi:10.1109/HNICEM48295.2019.9072847

Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment

Vince William Carandang, Aristotle T. Ubando, Alvin B. Culaba

航空太空工程學系

研究成果: Conference contribution

2 引文斯高帕斯（Scopus）

摘要

Solar cooling systems have potential in the Philippines due to its favorable solar renewable resource based on the data gathered by reputable organizations. Involved in solar cooling systems are water cooling systems for the solar photovoltaic cell panels and collectors which consists of networks of pipes. This study simulated a water cooling system pipe section using ANSYS computational fluid dynamics (CFD) by manipulating the cooling water mass inlet flow rate and the pipe wall temperature to identify their significance in influencing the outlet water temperature. Using a 2k full factorial approach for the design of experiment, the data were analyzed in JMP Pro 11 through an analysis of variance. It was identified that only the cooling water mass inlet flow rate is the only significant factor in the study, and its influence to the outlet water temperature was identified through the equation generated using the parameter estimates function in JMP Pro 11.

原文	English
主出版物標題	2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019
發行者	Institute of Electrical and Electronics Engineers Inc.
ISBN（電子）	9781728130446
DOIs	https://doi.org/10.1109/HNICEM48295.2019.9072847
出版狀態	Published - 2019 11月
事件	11th IEEE International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019 - Laoag, Philippines 持續時間: 2019 11月 29 → 2019 12月 1

出版系列

名字	2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019

Conference

Conference	11th IEEE International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019
國家/地區	Philippines
城市	Laoag
期間	19-11-29 → 19-12-01

All Science Journal Classification (ASJC) codes

人工智慧
電腦網路與通信
電腦科學應用
資訊系統與管理
電氣與電子工程
管理、監督、政策法律
控制和優化

UN SDG

此研究成果有助於以下永續發展目標

存取文件

10.1109/HNICEM48295.2019.9072847

其它文件與鏈接

引用此

Carandang, V. W., Ubando, A. T., & Culaba, A. B. (2019). Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment. 於 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019 Article 9072847 (2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/HNICEM48295.2019.9072847

Carandang, Vince William ; Ubando, Aristotle T. ; Culaba, Alvin B. / Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment. 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019. Institute of Electrical and Electronics Engineers Inc., 2019. (2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019).

@inproceedings{615562b2ef444791829473fef0053414,

title = "Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment",

abstract = "Solar cooling systems have potential in the Philippines due to its favorable solar renewable resource based on the data gathered by reputable organizations. Involved in solar cooling systems are water cooling systems for the solar photovoltaic cell panels and collectors which consists of networks of pipes. This study simulated a water cooling system pipe section using ANSYS computational fluid dynamics (CFD) by manipulating the cooling water mass inlet flow rate and the pipe wall temperature to identify their significance in influencing the outlet water temperature. Using a 2k full factorial approach for the design of experiment, the data were analyzed in JMP Pro 11 through an analysis of variance. It was identified that only the cooling water mass inlet flow rate is the only significant factor in the study, and its influence to the outlet water temperature was identified through the equation generated using the parameter estimates function in JMP Pro 11.",

author = "Carandang, {Vince William} and Ubando, {Aristotle T.} and Culaba, {Alvin B.}",

note = "Funding Information: The first author would like to acknowledge the Engineering Research and Development for Technology (ERDT) Consortium and the Department of Science and Technology – Science Education Institute (DOST-SEI) for supporting the author{\textquoteright}s academic endeavor to pursue his Master of Science in Mechanical Engineering degree. Publisher Copyright: {\textcopyright} 2019 IEEE.; 11th IEEE International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019 ; Conference date: 29-11-2019 Through 01-12-2019",

year = "2019",

month = nov,

doi = "10.1109/HNICEM48295.2019.9072847",

language = "English",

series = "2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019",

address = "United States",

}

Carandang, VW, Ubando, AT & Culaba, AB 2019, Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment. 於 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019., 9072847, 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019, Institute of Electrical and Electronics Engineers Inc., 11th IEEE International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019, Laoag, Philippines, 19-11-29. https://doi.org/10.1109/HNICEM48295.2019.9072847

Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment. / Carandang, Vince William; Ubando, Aristotle T.; Culaba, Alvin B.
2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 9072847 (2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019).

研究成果: Conference contribution

TY - GEN

T1 - Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment

AU - Carandang, Vince William

AU - Ubando, Aristotle T.

AU - Culaba, Alvin B.

N1 - Funding Information: The first author would like to acknowledge the Engineering Research and Development for Technology (ERDT) Consortium and the Department of Science and Technology – Science Education Institute (DOST-SEI) for supporting the author’s academic endeavor to pursue his Master of Science in Mechanical Engineering degree. Publisher Copyright: © 2019 IEEE.

PY - 2019/11

Y1 - 2019/11

N2 - Solar cooling systems have potential in the Philippines due to its favorable solar renewable resource based on the data gathered by reputable organizations. Involved in solar cooling systems are water cooling systems for the solar photovoltaic cell panels and collectors which consists of networks of pipes. This study simulated a water cooling system pipe section using ANSYS computational fluid dynamics (CFD) by manipulating the cooling water mass inlet flow rate and the pipe wall temperature to identify their significance in influencing the outlet water temperature. Using a 2k full factorial approach for the design of experiment, the data were analyzed in JMP Pro 11 through an analysis of variance. It was identified that only the cooling water mass inlet flow rate is the only significant factor in the study, and its influence to the outlet water temperature was identified through the equation generated using the parameter estimates function in JMP Pro 11.

AB - Solar cooling systems have potential in the Philippines due to its favorable solar renewable resource based on the data gathered by reputable organizations. Involved in solar cooling systems are water cooling systems for the solar photovoltaic cell panels and collectors which consists of networks of pipes. This study simulated a water cooling system pipe section using ANSYS computational fluid dynamics (CFD) by manipulating the cooling water mass inlet flow rate and the pipe wall temperature to identify their significance in influencing the outlet water temperature. Using a 2k full factorial approach for the design of experiment, the data were analyzed in JMP Pro 11 through an analysis of variance. It was identified that only the cooling water mass inlet flow rate is the only significant factor in the study, and its influence to the outlet water temperature was identified through the equation generated using the parameter estimates function in JMP Pro 11.

UR - http://www.scopus.com/inward/record.url?scp=85084755777&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85084755777&partnerID=8YFLogxK

U2 - 10.1109/HNICEM48295.2019.9072847

DO - 10.1109/HNICEM48295.2019.9072847

M3 - Conference contribution

AN - SCOPUS:85084755777

T3 - 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019

BT - 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 11th IEEE International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019

Y2 - 29 November 2019 through 1 December 2019

ER -

Carandang VW, Ubando AT, Culaba AB. Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment. 於 2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019. Institute of Electrical and Electronics Engineers Inc. 2019. 9072847. (2019 IEEE 11th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management, HNICEM 2019). doi: 10.1109/HNICEM48295.2019.9072847

Identification of Factor Significance in a Water Cooling Pipe Section using ANSYS CFD through a Full Factorial Design of Experiment

摘要

出版系列

Conference

All Science Journal Classification (ASJC) codes

UN SDG

存取文件

其它文件與鏈接

指紋

引用此