Improved high-Q microwave dielectric resonator using ZnO and WO3-doped Zr0.8Sn0.2TiO4 ceramics

Cheng Liang Huang, Cheng Shing Hsu, Ruei Jsung Lin

研究成果: Article同行評審

46 引文 斯高帕斯(Scopus)

摘要

The effect of WO3 addition on the microstructures and the microwave dielectric properties of Zr0.8Sn0.2TiO4 ceramics have been investigated. It is found that low-level doping of ZnO (1 wt%) and WO3 (up to 1 wt%) can significantly improve the density and dielectric properties of Zr0.8Sn0.2TiO4 ceramics. Zr0.8Sn0.2TiO4 ceramics with additives could be sintered to a theoretical density higher than 98% at 1340°C. Second phases were not observed at the level of 0.25-1 wt% WO3 addition. The dielectric constant (εr) and the temperature coefficient of resonant frequency (τf) were not significantly affected, while the unloaded quality factors Q were effectively promoted by WO3 addition. An εr value of 37.8, Q·f value of 61,000 (at 7 GHz), and τf value of -3.9 ppm/°C were obtained for 1 wt% ZnO-dop ed Zr0.8Sn0.2TiO4 ceramics with 0.25 wt% WO3 addition sintered at 1340°C.

原文English
頁(從 - 到)1985-1993
頁數9
期刊Materials Research Bulletin
36
發行號11
DOIs
出版狀態Published - 2001 9月 15

All Science Journal Classification (ASJC) codes

  • 一般材料科學
  • 凝聚態物理學
  • 材料力學
  • 機械工業

指紋

深入研究「Improved high-Q microwave dielectric resonator using ZnO and WO3-doped Zr0.8Sn0.2TiO4 ceramics」主題。共同形成了獨特的指紋。

引用此