Improving conversion efficiency of co-electrodeposited CuInSe2 thin film solar cells with substrate and solution heating

Chen Su Chiang, W. H. Lee, T. W. Chang, Y. H. Su

研究成果: Article同行評審

6 引文 斯高帕斯(Scopus)

摘要

As-prepared electrodeposited CuInSe2 film is amorphous and rough. After CuInSe2 films growth, cadmium sulfide layers are deposited by chemical bath. The interface between the CuInSe2 layer and the CdS layer is a p–n junction for high-efficiency solar cells. The CuInSe2 layer must be defect-free and smooth to make a junction. In this work, CuInSe2 films with a smooth surface are obtained by heating the substrate and solution, and the solar cell of open circuit voltage is improved from 69 to 371 mV, the fill factor from 26.3 to 52 % and the conversion efficiency from 0.49 to 6.46 %. The structural properties of these selenized films are investigated using X-ray diffraction (XRD). Field-emission scanning electron microscopy images indicate that the ordered copper indium diselenide thin films are entirely filled. XRD results show that the copper indium diselenide thin films are crystalline with highly preferential orientation. Energy-dispersive spectroscopy analysis was used to determine the composition of the films.

原文English
頁(從 - 到)549-556
頁數8
期刊Journal of Applied Electrochemistry
45
發行號6
DOIs
出版狀態Published - 2015 6月 1

All Science Journal Classification (ASJC) codes

  • 一般化學工程
  • 電化學
  • 材料化學

指紋

深入研究「Improving conversion efficiency of co-electrodeposited CuInSe2 thin film solar cells with substrate and solution heating」主題。共同形成了獨特的指紋。

引用此