Integrated kinematic and dynamic designs for variable-speed plate cam mechanisms

H. S. Yan, C. C. Yeh

研究成果: Article

7 引文 (Scopus)

摘要

This work presents a systematic approach to improve the kinematic and dynamic characteristics of plate cam mechanisms by using the Bezier curve as the input speed trajectory. The analytical models of kinematic and dynamic designs for a variable-speed plate cam mechanism are derived first. Speed trajectories of the cam are obtained by employing the Bezier curve. Then, an approach to integrate kinematic and dynamic designs for motion adaptation and to reduce the input torque at the same time based on multi-objective optimization is proposed. Two examples are provided for the design models to illustrate the design process. Finally, an experimental set-up is established, and the data of related characteristics is measured to verify the proposed design for variable-speed plate cam mechanisms.

原文English
頁(從 - 到)194-203
頁數10
期刊Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
225
發行號1
DOIs
出版狀態Published - 2011 一月 1

指紋

Cams
Kinematics
Trajectories
Multiobjective optimization
Analytical models
Torque

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering

引用此文

@article{12e98059ca7b4f0c9a704b2203e63690,
title = "Integrated kinematic and dynamic designs for variable-speed plate cam mechanisms",
abstract = "This work presents a systematic approach to improve the kinematic and dynamic characteristics of plate cam mechanisms by using the Bezier curve as the input speed trajectory. The analytical models of kinematic and dynamic designs for a variable-speed plate cam mechanism are derived first. Speed trajectories of the cam are obtained by employing the Bezier curve. Then, an approach to integrate kinematic and dynamic designs for motion adaptation and to reduce the input torque at the same time based on multi-objective optimization is proposed. Two examples are provided for the design models to illustrate the design process. Finally, an experimental set-up is established, and the data of related characteristics is measured to verify the proposed design for variable-speed plate cam mechanisms.",
author = "Yan, {H. S.} and Yeh, {C. C.}",
year = "2011",
month = "1",
day = "1",
doi = "10.1243/09544062JMES2321",
language = "English",
volume = "225",
pages = "194--203",
journal = "Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science",
issn = "0954-4062",
publisher = "SAGE Publications Ltd",
number = "1",

}

TY - JOUR

T1 - Integrated kinematic and dynamic designs for variable-speed plate cam mechanisms

AU - Yan, H. S.

AU - Yeh, C. C.

PY - 2011/1/1

Y1 - 2011/1/1

N2 - This work presents a systematic approach to improve the kinematic and dynamic characteristics of plate cam mechanisms by using the Bezier curve as the input speed trajectory. The analytical models of kinematic and dynamic designs for a variable-speed plate cam mechanism are derived first. Speed trajectories of the cam are obtained by employing the Bezier curve. Then, an approach to integrate kinematic and dynamic designs for motion adaptation and to reduce the input torque at the same time based on multi-objective optimization is proposed. Two examples are provided for the design models to illustrate the design process. Finally, an experimental set-up is established, and the data of related characteristics is measured to verify the proposed design for variable-speed plate cam mechanisms.

AB - This work presents a systematic approach to improve the kinematic and dynamic characteristics of plate cam mechanisms by using the Bezier curve as the input speed trajectory. The analytical models of kinematic and dynamic designs for a variable-speed plate cam mechanism are derived first. Speed trajectories of the cam are obtained by employing the Bezier curve. Then, an approach to integrate kinematic and dynamic designs for motion adaptation and to reduce the input torque at the same time based on multi-objective optimization is proposed. Two examples are provided for the design models to illustrate the design process. Finally, an experimental set-up is established, and the data of related characteristics is measured to verify the proposed design for variable-speed plate cam mechanisms.

UR - http://www.scopus.com/inward/record.url?scp=79251517079&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79251517079&partnerID=8YFLogxK

U2 - 10.1243/09544062JMES2321

DO - 10.1243/09544062JMES2321

M3 - Article

AN - SCOPUS:79251517079

VL - 225

SP - 194

EP - 203

JO - Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

JF - Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

SN - 0954-4062

IS - 1

ER -