Integrated single-inductor dual-output DC-DC converter with power-distributive control

Chi Yuan Huang, Ying Chi Chen, Chien-Hung Tsai

研究成果: Paper

6 引文 (Scopus)

摘要

This paper presents an integrated single-inductor dual-output (SIDO) buck-boost or boost-boost with powerdistributive (PD) control. The proposed converter adopts voltage-mode control to achieve better noise immunity. Only one signal loop contains a compensation circuit, which reduces cost and makes the converter suitable for SoC applications. The proposed SIDO converter was fabricated in TSMC 0.18μm 1P6M 3.3V CMOS process with supply voltage 1.6V to 3.3V. The first output in the proposed converter can operate in either buck or boost mode according to the supply voltage while the other one operates in boost mode.

原文English
頁面33-36
頁數4
DOIs
出版狀態Published - 2013 五月 27
事件2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013 - Kaohsiung, Taiwan
持續時間: 2013 二月 252013 二月 26

Other

Other2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013
國家Taiwan
城市Kaohsiung
期間13-02-2513-02-26

指紋

DC-DC converters
Power control
Electric potential
Networks (circuits)
Costs

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering

引用此文

Huang, C. Y., Chen, Y. C., & Tsai, C-H. (2013). Integrated single-inductor dual-output DC-DC converter with power-distributive control. 33-36. 論文發表於 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan. https://doi.org/10.1109/ISNE.2013.6512279
Huang, Chi Yuan ; Chen, Ying Chi ; Tsai, Chien-Hung. / Integrated single-inductor dual-output DC-DC converter with power-distributive control. 論文發表於 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan.4 p.
@conference{afea4b60f96f4ab0a2b21a13cb3d2d21,
title = "Integrated single-inductor dual-output DC-DC converter with power-distributive control",
abstract = "This paper presents an integrated single-inductor dual-output (SIDO) buck-boost or boost-boost with powerdistributive (PD) control. The proposed converter adopts voltage-mode control to achieve better noise immunity. Only one signal loop contains a compensation circuit, which reduces cost and makes the converter suitable for SoC applications. The proposed SIDO converter was fabricated in TSMC 0.18μm 1P6M 3.3V CMOS process with supply voltage 1.6V to 3.3V. The first output in the proposed converter can operate in either buck or boost mode according to the supply voltage while the other one operates in boost mode.",
author = "Huang, {Chi Yuan} and Chen, {Ying Chi} and Chien-Hung Tsai",
year = "2013",
month = "5",
day = "27",
doi = "10.1109/ISNE.2013.6512279",
language = "English",
pages = "33--36",
note = "2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013 ; Conference date: 25-02-2013 Through 26-02-2013",

}

Huang, CY, Chen, YC & Tsai, C-H 2013, 'Integrated single-inductor dual-output DC-DC converter with power-distributive control' 論文發表於 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan, 13-02-25 - 13-02-26, 頁 33-36. https://doi.org/10.1109/ISNE.2013.6512279

Integrated single-inductor dual-output DC-DC converter with power-distributive control. / Huang, Chi Yuan; Chen, Ying Chi; Tsai, Chien-Hung.

2013. 33-36 論文發表於 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan.

研究成果: Paper

TY - CONF

T1 - Integrated single-inductor dual-output DC-DC converter with power-distributive control

AU - Huang, Chi Yuan

AU - Chen, Ying Chi

AU - Tsai, Chien-Hung

PY - 2013/5/27

Y1 - 2013/5/27

N2 - This paper presents an integrated single-inductor dual-output (SIDO) buck-boost or boost-boost with powerdistributive (PD) control. The proposed converter adopts voltage-mode control to achieve better noise immunity. Only one signal loop contains a compensation circuit, which reduces cost and makes the converter suitable for SoC applications. The proposed SIDO converter was fabricated in TSMC 0.18μm 1P6M 3.3V CMOS process with supply voltage 1.6V to 3.3V. The first output in the proposed converter can operate in either buck or boost mode according to the supply voltage while the other one operates in boost mode.

AB - This paper presents an integrated single-inductor dual-output (SIDO) buck-boost or boost-boost with powerdistributive (PD) control. The proposed converter adopts voltage-mode control to achieve better noise immunity. Only one signal loop contains a compensation circuit, which reduces cost and makes the converter suitable for SoC applications. The proposed SIDO converter was fabricated in TSMC 0.18μm 1P6M 3.3V CMOS process with supply voltage 1.6V to 3.3V. The first output in the proposed converter can operate in either buck or boost mode according to the supply voltage while the other one operates in boost mode.

UR - http://www.scopus.com/inward/record.url?scp=84877965540&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84877965540&partnerID=8YFLogxK

U2 - 10.1109/ISNE.2013.6512279

DO - 10.1109/ISNE.2013.6512279

M3 - Paper

AN - SCOPUS:84877965540

SP - 33

EP - 36

ER -

Huang CY, Chen YC, Tsai C-H. Integrated single-inductor dual-output DC-DC converter with power-distributive control. 2013. 論文發表於 2013 IEEE International Symposium on Next-Generation Electronics, ISNE 2013, Kaohsiung, Taiwan. https://doi.org/10.1109/ISNE.2013.6512279