Interfacial morphology in polymer light-emitting diodes

Yeau Ren Jeng, Ming Lung Guo, Hung Chang Li, Tzung Fang Guo

研究成果: Article同行評審

3 引文 斯高帕斯(Scopus)


This work considers the anode at the indium-tin oxide (ITO)/poly[2-methoxy- 5- (2′ -ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) interface in polymer light-emitting diodes (PLEDs). The surface morphology of ITO is studied by scanning probe microscopy (SPM). The mechanical properties of ITO and MEH-PPV are measured by nanoindentation. The results indicate that the surface roughness, defined as the root-mean-square of the surface height on the surface of the ITO substrate, influences the injection of hole-carriers. The injected current is dominated by the tunneling of hole-carriers at the low bias. Increasing the effect contact area at the ITO/MEH-PPV interface lowers the barrier to the injection of holes through the ITO anode to the MEH-PPV light-emitting layer.

頁(從 - 到)D139-D141
期刊Electrochemical and Solid-State Letters
出版狀態Published - 2007

All Science Journal Classification (ASJC) codes

  • 一般化學工程
  • 一般材料科學
  • 物理與理論化學
  • 電化學
  • 電氣與電子工程


深入研究「Interfacial morphology in polymer light-emitting diodes」主題。共同形成了獨特的指紋。