Investigation on thermal solar absorber film using spray coating technology

P. J. Chen, T. C. Lin, M. R. Wang, Y. L. Li, K. C. Chang

研究成果: Paper同行評審

摘要

The spectrally selective absorbing film plays a key role in determining the collecting capability of solar thermal energy in the application of solar water heater. This research experimentally investigates influences of importance parameters among spray coating process on the solar absorptance, thermal emittance and collection efficiency of the selective absorbing film. Selective parameters include thickness of the selective absorbing film, median diameters of the spray, and the frequency of the coating etc. Results show that thickness of the selective absorbing film has a strong effect on the absorptance and the emittance of the selective absorbing film. The optimum collection performance of the spectrally selective films with absorptance up to 93% while the emittance down to 65% can be achieved at a film thickness of 3.3 μm. Thus, proper selection of the film thickness results in the optimum ratio of the absorptance to the emittance and thus the optimum collection efficiency of thermal solar energy. Results also show that higher median diameters of the spray can increase the absorptance and reduce the emittance, thus has a positive effect of the collection efficiency of thermal solar energy. It is caused by redistribution of carbon particles inside spray flow, the deposition effect onto a substrate, as well as the evaporation of the solvent.

原文English
出版狀態Published - 2015
事件13th International Conference on Liquid Atomization and Spray Systems, ICLASS 2015 - Tainan, Taiwan
持續時間: 2015 八月 232015 八月 27

Conference

Conference13th International Conference on Liquid Atomization and Spray Systems, ICLASS 2015
國家/地區Taiwan
城市Tainan
期間15-08-2315-08-27

All Science Journal Classification (ASJC) codes

  • 表面、塗料和薄膜

指紋

深入研究「Investigation on thermal solar absorber film using spray coating technology」主題。共同形成了獨特的指紋。

引用此