Lamellar orientation and interlamellar cracks in co-crystallized poly(ethylene oxide)/poly(L-lactic acid) blend

Ya Ting Hsieh, Siti Nurkhamidah, Eamor M. Woo

研究成果: Article

15 引文 斯高帕斯(Scopus)


The correlation between the lamellar orientation in ring-banded spherulites and crack patterns in blends of two crystalline polymers crystallized in two steps was investigated. The two polymers were poly(ethylene oxide) (PEO) and poly(L-lactic acid) (PLLA) with a low molecular weight. The techniques used for this investigation included polarizing light optical microscopy, scanning electron microscopy and atomic force microscopy. Crack formation was influenced by the ring band patterns in PLLA and overlapping or impingement between PEO spherulites upon cooling. By extracting the water-soluble PEO from the PEO/PLLA blend, the inner morphology of the lamellar textures was further revealed to have a complex pattern. It consisted of the outer macro-lamellae with a flat-on width of 20 m and twisting micro-lamellae with a 1-2 μm edge-on width. As the excess PEO was etched off from the valley and the interlamellar crevices of the PLLA lamellae, the outer macro-lamellae plates (∼20 μm flat-on width) exhibited up and down periodicity with flat-on orientation. However, the micro-lamellae (with 1-2 μm edge-on width) with twisting were visible inside the cracks. Similar analysis of a PEO-rich composition, PEO/PLLA (80/20) blend with irregular ring bands and no cracks, revealed that the outer macro-lamellae were not present. However, all micro-lamellae twists in the ridge regions irregularly protrude out to create zig-zag banding.

頁(從 - 到)762-769
期刊Polymer Journal
出版狀態Published - 2011 九月 1

All Science Journal Classification (ASJC) codes

  • Polymers and Plastics
  • Materials Chemistry

指紋 深入研究「Lamellar orientation and interlamellar cracks in co-crystallized poly(ethylene oxide)/poly(L-lactic acid) blend」主題。共同形成了獨特的指紋。

  • 引用此